"REMEMBER" Poster

Super cool classic street corner image from the late 60's. Features a couple GTO's, a coupe Corvette, and a fastback GT Mustang. Looks great in any room. Measures 20 inches across by 24 inches tall. Perfect for a Muscle Car enthusiast!

PART NUMBER: GIF-337

New show quality polished chrome center caps set featuring the raised "SS" logo on black background for your Chevelle or Nova. Exact in detail to Chevelle and Nova originals. This kit includes all 4 caps, backing retainers, and mounting hardware. Deep dish means where the SS insert is, its about a 1/4 inch deep. If you want the real factory correct Super Sport caps, here they are. Magnificent set of center caps!

PART NUMBER: WHE-145

New SS wheel center cap retainer mounting bolts for your GM classic. These are the cap mounting backing retainer bolts. Designed to work with the five spoke SS wheel rims. Correct shape, size, and details. Sold as an 8 piece kit, does all four caps.

Fits;
69 Camaro, Chevelle, El Camino, Nova
70 Chevelle, El Camino, and Nova

PART NUMBER: WHE-38B

New SS wheel center cap retainer for your GM classic. This is the cap mounting backing, retainer. Designed to work with the five spoke SS wheel rims. Correct shape, size, and details. Replaces original GM part number 393799 perfectly.

Fits;
69 Camaro, Chevelle, El Camino, Nova
70 Chevelle, El Camino, and Nova

PART NUMBER: WHE-38

***This has been replaced by PAI-185 Nu-Cast Flameproof Paint***

Cast Blast High Temperature 1200 Hot Spot Spray Paint, Iron Gray

New cast blast iron gray spray paint for your Chevelle or Nova. Brings many components back to life. Comes ready to go in an easy to use 12 oz spray can. This is a very good quality paint at a reasonable price. Creates a porcelain-like bond at high temperatures. Resists peeling, loss of adhesion, and blistering. Cast Blast High Temp Hot Spot is perfect for exhaust manifolds, headers mufflers and more. Hi solid formulation allows for more coverage than standard spray. Resists light cleaning solvents such as mineral spirits. It protects against rust, has a low sheen and resists heat up to 1200F continuous. For lower temperature applications, use our Cast Blast Iron Gray, Part # PAI-81.

Suggested Uses:

11 Inch Manual Transmission Clutch Flywheel, Imported

New correct design flywheel for your Chevelle or Nova. Exact fit for all larger eleven inch clutch set ups. Overall measurement is 14 inches and has 168 teeth. Fits all internally balanced small block and big block engines. Will not work for 400 or 454 externally balanced engines or newer style one piece rear main seal engines. Replaces GM part # 3991469

PART NUMBER: CLU-76M

1156 LED Backup Light Bulb, Ultra Bright WHITE Single Filament, Each

This new WHITE LED bulb has 18 LEDs per bulb for your Chevelle or Nova. This 1156 single-contact bulb creates a 360° viewing angle for better allover light emission with reduced hot spots. Easy plug-and-play installation, just twist to lock in place. The energy-efficient bulb operates within a 12V DC range and is designed to last 30,000 hours on your car, truck, SUV, or van, 25 times longer than incandescent bulbs. Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb. Replaces any standard 1156 bulb. This bulb will replace the standard backup bulbs. Sold each, order yours today!!

Single Filament Bulb

PART NUMBER: LIG-999

1157 LED Stop / Turn / Park Light Bulb, Ultra Bright AMBER Dual Filament, Each

This new AMBER LED bulb has 18 LEDs per bulb for your Chevelle or Nova. This 1156 dual-contact bulb creates a 360° viewing angle for better allover light emission with reduced hot spots. Easy plug-and-play installation, just twist to lock in place. The energy-efficient bulb operates within a 12V DC range and is designed to last 30,000 hours on your car, truck, SUV, or van, 25 times longer than incandescent bulbs. Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb. Replaces any standard 1157 bulb. This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs. Sold each, order yours today!!

Dual Filament Bulb

PART NUMBER: LIG-901

1157 LED Stop / Turn / Park Light Bulb, Ultra Bright WHITE Dual Filament, Each

This new WHITE LED bulb has 18 LEDs per bulb for your Chevelle or Nova. This 1156 dual-contact bulb creates a 360° viewing angle for better allover light emission with reduced hot spots. Easy plug-and-play installation, just twist to lock in place. The energy-efficient bulb operates within a 12V DC range and is designed to last 30,000 hours on your car, truck, SUV, or van, 25 times longer than incandescent bulbs. Super Brightness: The luminance is 2 to 3 times stronger than traditional LED bulb. Replaces any standard 1157 bulb. This bulb will replace the stop and turn tail light bulbs and the front park light / turn signal bulbs. Sold each, order yours today!!

Dual Filament Bulb

PART NUMBER: LIG-900

New set of four 14 x 6 Rally wheel trim rings. Inner clips go all the way around the ring. Outer lip is rounded and valve stem opening is "U" shaped. Replaces GM part number 475019. Correct rally wheel picture shown is for reference only. Sold as a matched set of 4 only.

PART NUMBER: WHE-10A

14 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only

14X7 Stock Steelie COPO style dog dish wheel is now available. This steel wheel is 14 X 7 and sold individually. This O.E. Style Chevy wheel in primer is a versatile wheel that fits 10 1/8" outside knob caps. Perfect wheel for the COPO or SLEEPER look. This will was found on the COPO Super Cars with the GM factory dog dish hub caps. These steel wheels are an easy way to upgrade the look of your car or truck. Paint them the exact color you want, and with so many different caps to choose from, you can easily customize these wheels to your own unique style. Proudly Made in the USA!

Pictured painted with the Dog Dish Poverty Hub Cap for reference only. Cap, Paint, and Tire are sold separately.

PART NUMBER: WHE-754

14 X 7 Super Sport SS Five Spoke Wheel, Each

New OE style Super Sport five spoke wheel for your Chevelle or Nova. Exact factory look and design. Custom size of 14 inches in diameter and 7 inches wide. Comes pre-coated and ready to go. The 50 Series Chevy SS 396 wheel’s name says it all. Super Sport and big block style. Chevy guys love their big blocks, and many of the baddest cars on the street in the late sixties sported Super Sport badges and wheels, letting everyone know what was under the hood. The classic SS wheel from Wheel Vintiques features durable silver powder coat finish with semi gloss black painted windows. This is a 14x7" wheel with a single direct bolt 5 X 4.75" bolt pattern. Chevelle, Nova, and Camaro SS Wheels from the sixties used trim rings, and so do these premium quality 50 Series SS 396 wheels. Proudly Made in the USA!

Add this super cool SS wheel to your classic today!

PART NUMBER: WHE-322

New 14 x 7 Rally wheel trim ring for your classic. Replaces GM part number 475020. Picture of the correct wheel these fit is for reference only.

Part Number: WHE-133A

Set of four 14 x 7 Rally wheel trim rings. Replaces GM part number 475020. Picture of the correct wheel these fit is for reference only.

Part Number: WHE-133

14 x 7 Wheel Trim Rings, Super Sport Deep Dish SS Style, Each

New correct size trim ring for your Super Sport SS style wheel. Exact stainless steel design. 14" x 7" deep trim ring. Exact for 69 five spoke style wheels. Replaces GM part number 9796919. Picture of the correct wheel these fit is for reference only.

Part Number: WHE-20

14 x 7 Wheel Trim Rings, Super Sport Deep Dish SS Style, Set of 4

New correct size trim rings for your Super Sport SS style wheels. Exact stainless steel design. 14" x 7" deep trim rings in a set of 4. Exact for 69 five spoke style wheels. Replaces GM part number 9796919. Picture of the correct wheel these fit is for reference only.

PART NUMBER: WHE-21

New 15 x 6 Rally wheel trim ring. Inner clips go all the way around the ring. Outer lip is rounded and valve stem opening is "U" shaped. Correct rally wheel picture shown is for reference only. Sold as each.

Part Number: WHE-100

New set of four 15 x 6 Rally wheel trim rings. Inner clips go all the way around the ring. Outer lip is rounded and valve stem opening is "U" shaped. Correct rally wheel picture shown is for reference only. Sold as a set of 4.

Part Number: WHE-100A

15 x 7 Rally Wheel Trim Ring, Stepped Edge, Each

New 15 x 7 Rally wheel trim ring for your Chevelle or Nova. Features the correct stepped edge design, very very close to what was installed on your 15 x 7 inch rally wheels from the factory. Made from premium quality stainless steel. Replaces original GM part number 9796696. Correct wheel application shown is for reference only.

Please look at the pictures shown and make sure this is the version you need.

Part Number: WHE-15A

15 x 7 Rally Wheel Trim Rings, Stepped Edge Set of 4, USA Made

New set of original style trim rings for your Chevelle or Nova. This version fits all 15 X 7 inch rally wheels. Features the correct stepped edge and four inner riveted mounting clips. The clips don't wrap around the outer lip of the rim like some older versions. These are the most correct trim ring available today. Beautiful stainless steel, the real deal. Replaces original GM part number 9796696 perfeclty. Made in the USA! Very limited quantity, when they are gone, that's it!

Part Number: WHE-13

15 x 7 Rally Wheel Trim Rings, Stepped Edge, Set of 4

New 15 x 7 Rally wheel trim ring for your Chevelle or Nova. Features the correct stepped edge design, very very close to what was installed on your 15 x 7 inch rally wheels from the factory. Made from premium quality stainless steel. Replaces original GM part number 9796696. Correct wheel application shown is for reference only.

Please look at the pictures shown and make sure this is the version you need.

Part Number: WHE-15

15 x 7 Stock Steelie COPO Style Dog Dish Wheel, Rim Only

15X7 Stock Steelie COPO style dog dish wheel is now available. This steel wheel is 15 X 7 and sold individually. This O.E. Style Chevy wheel in primer is a versatile wheel that fits 10 1/8" outside knob caps. Perfect wheel for the COPO or SLEEPER look. This will was found on the COPO Super Cars with the GM factory dog dish hub caps. These steel wheels are an easy way to upgrade the look of your car or truck. Paint them the exact color you want, and with so many different caps to choose from, you can easily customize these wheels to your own unique style. Proudly Made in the USA!

Pictured painted with the Dog Dish Poverty Hub Cap for reference only. Cap, Paint, and Tire are sold separately.

PART NUMBER: WHE-755

15 X 7 Super Sport SS Five Spoke Wheel, Each

New OE style Super Sport five spoke wheel for your Chevelle or Nova. Exact factory look and design. Custom size of 15 inches in diameter and 7 inches wide. Comes pre-coated and ready to go. The 50 Series Chevy SS 396 wheel’s name says it all. Super Sport and big block style. Chevy guys love their big blocks, and many of the baddest cars on the street in the late sixties sported Super Sport badges and wheels, letting everyone know what was under the hood. The classic SS wheel from Wheel Vintiques features durable silver powder coat finish with semi gloss black painted windows. This is a 15x7" wheel with a single direct bolt 5 X 4.75" bolt pattern. Chevelle, Nova, and Camaro SS Wheels from the sixties used trim rings, and so do these premium quality 50 Series SS 396 wheels. Proudly Made in the USA!

Add this super cool SS wheel to your classic today!

PART NUMBER: WHE-323

New original style trim ring for your classic. This version fits all 15 X 7 inch rally wheels. Features the correct stepped edge and four inner riveted mounting clips. The clips don't wrap around the outer lip of the rim like some older versions. This is the most correct trim ring available today. Beautiful stainless steel, the real deal. Made in the USA! Very limited quantity, when they are gone, thats it!

Part Number: WHE-17

15 x 8 Stock Steelie COPO Style Dog Dish Wheel, Rim Only

15X8 Stock Steelie COPO style dog dish wheel is now available. This steel wheel is 15 X 8 and sold individually. This O.E. Style Chevy wheel in primer is a versatile wheel that fits 10 1/8" outside knob caps. Perfect wheel for the COPO or SLEEPER look. This will was found on the COPO Super Cars with the GM factory dog dish hub caps. These steel wheels are an easy way to upgrade the look of your car or truck. Paint them the exact color you want, and with so many different caps to choose from, you can easily customize these wheels to your own unique style. Proudly Made in the USA!

Pictured painted with the Dog Dish Poverty Hub Cap for reference only. Cap, Paint, and Tire are sold separately.

PART NUMBER: WHE-756

15 X 8 Camaro Super Sport SS Five Spoke Wheel, Each

New OE style Super Sport five spoke wheel for your Chevelle or Nova. Exact factory look and design. Custom size of 15 inches in diameter and 8 inches wide. Comes pre-coated and ready to go. The 50 Series Chevy SS 396 wheel’s name says it all. Super Sport and big block style. Chevy guys love their big blocks, and many of the baddest cars on the street in the late sixties sported Super Sport badges and wheels, letting everyone know what was under the hood. The classic SS wheel from Wheel Vintiques features durable silver powder coat finish with semi gloss black painted windows. This is a 15x8" wheel with a single direct bolt 5 X 4.75" bolt pattern. Chevelle, Nova, and Camaro SS Wheels from the sixties used trim rings, and so do these premium quality 50 Series SS 396 wheels. Proudly Made in the USA!

Add this super cool SS wheel to your classic today!

* Please Note ~ Must use 15 X 7 trim rings

PART NUMBER: WHE-324

1955 - 1967 Small Block Chevy Crankcase Vent Tube Assembly with Gasket and Bolt

This Crank Case Vent Tube is also known as the Dixie Cup Vent Adapter. Made out of correct OEM thickness stamped steel. Exact fit, superior workmanship. Crankcase vent assembly includes:vent cap with washer & seal, gasket and bolt. Vent cap requires 1/2" hose. GM Part #: Part of engine Assembly.

PART NUMBER: AIR-99

Chevrolet by the Numbers is the only authoritative reference for identifying and verifying the correct Chevrolet parts, by casting number, for your exact model. Restoring your Chevrolet to original factory specifications? You'll find the casting numbers that correspond to your car's Vehicle Identification Number. With this correct information you will avoid buying - and being sold - the wrong parts. Buying a Chevrolet that has been restored? These numbers will help you determine whether or not the car has been authentically restored, and whether it's a smart investment. Searching for factory high-performance parts at swap meets? Chevrolet by the Numbers tells you which parts to look for, why they are special, and which engines those parts came with.

PART NUMBER: LIT-47-CH

New correct design pulley for your Chevelle or Nova. Diameter is 7 1/8 inches and the height is 2 3/4 inches. Exact fit for all; *6 cylinder base models *327, 350, 396 engines *will not work with smog, or air conditioning models

Fits:
1962 - 1968 Nova
1964 - 1968 Chevelle

PART NUMBER: ENC-117

New OE Style windshield washer jar bracket for Chevelle & Novas. Correct piece with all the right mounting holes and locations. Replaces GM part # 548935 perfectly.

Fits:
1962 - 1970 Nova
1964 - 1969 Chevelle

*Technically 1967 Chevelle's use a different bracket (WIN-4050) with the extra mounting tab to allow for clearence. *

PART NUMBER: WIN-12

Exact shape, size, and design as factory white version. Windshield washer fluid reservoir bottle jar in black for all 1962 - 1970 Nova & 1964 - 1969 Chevelle models.

PART NUMBER: WIN-237

Windshield washer fluid reservoir bottle jar. Brand new correct washer bottle kit for all 1962 - 1970 Nova & 1964 - 1969 Chevelle models.

PART NUMBER: WIN-5

Door latch mechanism mounting screws set of 3. Excellent quality.

Fits:
1964 - 1972 Chevelle
1962 - 1972 Nova

PART NUMBER: DWN-76

Works great for all OE style points type distributors. Fits all V8 engines, small block or big block.

Fits:
1964 - 1973 Chevelle
1962 - 1973 Nova

PART NUMBER: ENC-365

1962 - 1974 Windshield Washer Jar Cap, 3798372

New original style windshield washer bottle jar cap for your 62 - 74 Chevelle or Nova. Works great for most all models. Correct WINDSHIELD WASHER FLUID ONLY text on the top. Replaces GM Part # 3798372 perfectly.

1963 - 1964 Nova Window Crank Handle with Chrome Knob, Custom, Two Bar

New two bar window crank knob in chrome for your 63 and 64 Nova / Chevy II. Looks great! Works with all Chevelle & Nova models, but was only factory installed on 63 and 64 Novas. Sold each.

PART NUMBER: INT-353

Transistor Ignition Amplifier Harness, Amplifier To Extension Harness

PART NUMBER: WIR-4259

1964 - 1965 Chevelle Convertible Master Interior Screw Kit

New comprehensive interior assembly fastener package, Correct for all 64 - 65 Chevelle Convertible models. Kit Contains 201 pieces. Made in the USA.

PART NUMBER: INT-4021

1964 - 1965 Chevelle Coupe Master Interior Screw Kit

New comprehensive interior assembly fastener package, Correct for all 64 - 65 Chevelle coupe models with standard interior. Kit Contains 224 pieces. Made in the USA.

PART NUMBER: INT-4020

Transistor Ignition Extension Harness, Starter To Amplifier Harness

PART NUMBER: WIR-4261

1964 - 1966 Chevelle 15" Original Style Spare Tire Cover with Crowsfeet Crosshatch Pattern

NEW, Original Style 1964 - 1966 Chevelle 15" Spare Tire Cover now available! This 64, 65, and 66 Chevelle 15 inch trunk spare tire features the correct Crowsfeet Crosshatch pattern with a fleece material liner. This tire cover is made of heavy-duty material is precision-cut to original pattern specifications. Made in the USA for a perfect fit and appearance!

PART NUMBER: TRU-4005

Floor Shifter (4 Speed) (Bucket Seat Car)(For Muncie Transmission Only)

PART NUMBER: CON-4014

1964 - 1966 Chevelle Brake Line Clip Set, 9 Piece Kit

New brake line clip set for your Chevelle. Works great for all 1964 - 1966 models. Sold as a 9 piece kit.

PART NUMBER: BRC-4073

Bucket seat retaining caps

PART NUMBER: INT-5399

1964 - 1966 Chevelle Clutch and Brake Pedal Assembly

New clutch and brake pedal assembly for your Chevelle. Exact fit for all models with a manual transmisison. Works for all manual transmisison equipped models, three or four speed cars. Be aware of cheaper priced versions that are primative raw metal. These are the original style, high quality pedals.

PART NUMBER: CLU-4001

64 - 66 Chevelle 1st design lower control arm bushings. These are a matched set of bushing that will replace worn bushings on one lower control arm. Two required per car sold as each.

PART NUMBER: SUS-4048

1964 - 1966 Chevelle Convertible Power Top Motor and Pump Assembly

Top quality motor assembly that has the correct electrical plug end and mounting system for your Chevelle. Works great for all 64, 65, and 66 models with a power convertible top. 5 year warranty when used with automatic transmission fluid - 3 year warranty when used with brake fluid. Made in the USA.

PART NUMBER: CNV-4016

1964 - 1966 Chevelle Custom Aluminum Pedals Set for Automatic Transmission

New super cool aluminum pedals set for your Chevelle. Exact fit for all 64 - 66 models. Works for all automatic transmission cars. Must use accelerator cable for gas pedal. Includes all hardware needed for installation. Complete set with both firewall mounted accelerator pedal kit and a matching custom auto brake pedals assembly. Truly a beautiful set!

Please note ~ Under dash pedal hanger is not included. It is pictured for your reference only.

PART NUMBER: PPD-36-CH

1964 - 1966 Chevelle Custom Aluminum Pedals Set for Manual Transmission

New super cool aluminum pedals set for your Chevelle. Exact fit for all 64 - 66 models. Works great for all manual transmission cars. Accelerator gas pedal is designed to work with throttle cable set ups only. Includes hardware needed for installation. Complete set with firewall mounted accelerator pedal kit, matching custom brake and clutch pedals. Truly a beautiful set!

Note: Under dash pedal support bracket is not included.

PART NUMBER: PPD-37-CH

Door and Rear Side Panel Trim Mouldings (Lower) (4 Pieces) (2 Door Hardtop)

PART NUMBER: INT-4585

Door lock cylinders (with orginal keys)

PART NUMBER: DWN-4345

New Door Lock Knob Ferrules for your 1964, 1965 or 1966 Chevelle. Sold as a pair. Correct door lock knob ferrule mounts to inner door panel top metal frame where door lock knob fits into.

Fits: 64, 65 & 66 Chevelle, Super Sport and Malibu

PART NUMBER: INT-4592

Chrome door lock knobs for 64, 65, 66 Chevelle models. Sold as a pair.

PART NUMBER: INT-4593

1964 - 1966 Chevelle Door Lock Knobs, Pair Black

Door lock knobs (black)

PART NUMBER: INT-4595

1964 - 1966 Chevelle Door Rubber Bumpers, 4 Piece Set

New rubber door bumper stopper set for your Chevelle. Exact fit for all 64, 65, and 66 models. Includes all four pieces, does one car.

PART NUMBER: WEA-4107

Exhaust Manifold Bolts (Small Block)

PART NUMBER: FUE-4000

Carpet firewall guard for 64, 65, 66 Chevelle models. Featuring accurate thickness and weight, these are exact replacements of factory originals. The highly-detailed injection molding process yields far superior parts than those previously vacuum formed. A guard is located on the firewall below the steering column; carpet tucks up under the firewall guard for correct installation. If cracked or missing, the guard should be replaced when installing carpet. Fits all 64, 65 and 66 Models

PART NUMBER: STE-4124

1964 - 1966 Chevelle FRONT Bumper Bolt Kit

1964, 1965 & 1966 Chevelle front bumper bolt kit. Exact fit for all 64, 65 & 66 models. This set comes complete with all stainless caped bolts, washers and nuts to mount the chrome front bumper to the bumper brackets. It's time to replace those old crusty original bumper bolts. Use with PART # BUM-4046 66-67 for the Rear Bumper Bolt Set.

Complete 28 Piece Front Bumper Bolt Set for all 64-66 Chevelle models.

PART NUMBER: BUM-4004

NEW GM Style Horn Contact Cam with installed spring and plunger. Exact fit for all 1964, 1965 1966 Chevelle's without a tilt steering column and ALL factory style steering wheels. Correct shape, size, and fit. Don't fight trying to install the little spring and plunger contact, this unit has them pre-installed for an easy installation!

Fits: 64, 65 & 66 Chevelles without tilt columns.

PART NUMBER: STE-4176

1964 - 1966 Chevelle Inside Rear View Mirror, Chrome 8 Inch

New interior rear view mirror for your Chevelle. Exact fit for all 64 65 and 66 models. Eight inch diameter with show chrome plating. Add this new mirror to your Malibu or Super Sport today!

Will fit all 64 - 72 models if you like this chrome version

PART NUMBER: INT-4205

Interior coat hooks

PART NUMBER: INT-5400

1964 - 1966 Chevelle Kick Panels with 100 watt Pioneer 6-1/2" Speakers for Non Factory Air Models, Pair

New 64, 65, and 66 Chevelle Kickpanels with Speakers come with built-in 6 1/2" coaxial 2-way 100 Pioneer Watt speakers. Kick Panels enhance the interior appearance of your ride, they provide great sound and install with little or no modifications to your vehicle. Designed to custom fit perfectly with the door panels on your Chevelle.

Kick Panels are made of high grade ABS plastic and can be painted to match the interior of your vehicle.

PART NUMBER: INT-5396P

1964 - 1966 Chevelle Kick Panels with 80 watt 6-1/2" Coaxial Speakers for Non Factory Air Models, Pair

New 64, 65, and 66 Chevelle Kickpanels with Speakers come with built-in 6 1/2" coaxial 2-way 80 Watt speakers. Kick Panels enhance the interior appearance of your ride, they provide great sound and install with little or no modifications to your vehicle. Designed to custom fit perfectly with the door panels on your Chevelle.

Kick Panels are made of high grade ABS plastic and can be painted to match the interior of your vehicle.

PART NUMBER: INT-5396

Kick Panels with Speakers (Black Only, with 80 Watt 6 1/2" Coaxial Speakers) (With Air Conditioning)

PART NUMBER: INT-5397

Lower steering column bearing

PART NUMBER: STE-4092

1966 Chevelle MALIBU POWER DRUM Front Brake Line Set, 3-Piece OE Steel

New 3 piece Front Brake Line Set for Power Drum brakes. Fits all 64 - 66 MALIBU models have a booster. This preformed front brake line kit includes all the metal brake lines to supply the front two wheels of your vehicle. Use with Part # BRC-4011 Front to Rear Brake Line.

Our replacement lines are engineered from factory original lines and CNC manufactured for precision.

PART NUMBER: BRC-4007

1964 - 1966 Chevelle Master Clutch Linkage Kit

New complete set with everything you need including pedal and clutch fork for 64 - 66 Chevelle. Our kit features the better looking clutch and brake pedal assembly. Excellent quality fit, and feel!

*Please choose Big Block or Small Block engine*

PART NUMBER: CLU-4023

Master cylinder (fits all except 66 with metallic linings)( 1" bore size)

PART NUMBER: BRC-4072

1964 - 1966 Chevelle Muncie Four Speed Chrome Shifter Handle w/ Pull-up Rabbit Ears for Bucket Seats

New Chrome Shifter Handle with Rabbit Ears for your 64-66 Chevelle. This handle is made for most original muncie shifters. The chrome handle lever is designed for the 64, 65, and 66 Chevelle models with bucket seats.

PART NUMBER: TRA-4556

New power brake booster for 64 - 66 Chevelle 9” inch diameter without DELCO stamp, single diaphragm. Gold cadmium plated. Great booster to keep the original look in tighter places.

PART NUMBER: BRC-4071

Power Window Harness, Driver Side Door & Crossover, El Camino & 2 Door Wagons

PART NUMBER: WIR-4194

This is the rear coil spring hold down clamp bracket for rear end. This is the factory mounting clamp brace that holds the rear coil spring to the rear end. Without these clamps, your spring will make a clunking noise when driving or going over bumps, or your spring can fall out completely. Fits 64, 65, 66 Chevelle / GTO / LeMans / Skylark / GS / Cutlass / 442 models. These clamps are sold each.

Fits all 1964, 64, 1965, 65, 1966, and 66 models

PART NUMBER: SUS-4054B

A must-have for any vehicle

Help eliminate a noisy ride

These Chevelle insulators are used between the rear coil spring and the frame of your vehicle to eliminate the noises created by metal-to-metal contact. Insulators are manufactured to OEM specifications for a precise fit and function. These rubber pads are sold as a pair.

1964 - 1966 Chevelle REAR Coil Springs, Pair

New rear coil spring set for your Chevelle. Exact fit for all 64, 65, and 66 models. Sold as a matched pair. These springs are designed to work only with true 64-66 factory GM rear ends. Please check your date and make double sure because these are not returnable.

Fits all; 1964, 64, 1965, 65, 1966, 66, cars

PART NUMBER: SUS-4054

Remote outside mirror pivot plate

PART NUMBER: EXM-4011

Steering Column Adapter Harness, For 1969-1974 Gm Column To Stock Dash Note: Adapts Horn, Directionals, Hazard Flasher To Stock 8 Pin T/L Dash Connector

PART NUMBER: WIR-4253

Steering Column Adapter Harness, For 1975 And Later Gm Column To Stock 1964-66 Dash Note: Adapts Horn, Directionals, Hazard Flasher To Stock 8 Pin T/L Dash Connector

PART NUMBER: WIR-4254

2 spoke wood wheel mounting hub for 64, 65 & 66 Chevelle models. Correct diameter and details. This hub is only needed for 2 spoke wood style steering wheels.

PART NUMBER: STE-4094

New 2 spoke woodgrain steering wheel for your Chevelle. Exact fit for all 64, 65 & 66 models. The simulated wood wheel was optional and can go for all models. This is the best quality reproduction available anywhere. Awesome wood grain, texture, and color. Replaces original GM fit and look perfectly. Looks great, add this wheel to your classic today!!

PART NUMBER: STE-4086

New radio antenna kit for your Chevelle. Exact fit for all 64, 65, and 66 models with any style radio. This one is for the front fender mounting location. The mast on this version telescopes up and down. Looks and works great. Includes everything needed for an easy install.

Please note ~ Do not overtighten nut. It will break!

PART NUMBER: DAS-4261

1964 - 1966 Chevelle Tilt Steering Column Turn Signal Switch Wiring Harness Adapter

New tilt steering column turn signal switch wiring harness adapter for your Chevelle. Exact fit for all 1964 - 1966 models with a tilt steering column.

Note ~ Please make sure these are the connections you need to mate.

PART NUMBER: WIR-4258

Tilt wheel release lever (with black knob)

PART NUMBER: STE-4089

Tilt wheel release lever (with chrome knob)

PART NUMBER: STE-4087

Transistor Ignition Amplifier Extension, Early Production, From Internal Circuit Board To Amp Housing Connector

PART NUMBER: WIR-4262

Jacking Instructions (Chevelle)

PART NUMBER: STI-4238

New trunk lock cylinder set for your Chevelle. Fits all 64, 65, and 66 models. This version features original style pear shaped headed keys. Includes trunk lock cylinder, gasket, "U" clip, rod, and OE style headed keys.

PART NUMBER: DWN-249-CH

1964 - 1966 Chevelle Turn Signal Cancelling Cam for Tilt Steering Column

New turn signal cancelling cam for your Chevelle. Exact fit for all 1964 - 1966 models with a correct factory style tilt steering column. Excellent quality and fit.

PART NUMBER: STE-4091

1964 - 1966 Chevelle Turn Signal Cancelling Cam, Without Tilt

New premium quality turn signal switch repair cam. Turn signal lever attaches to this part. Cancels turn signals automatically for cars without tilt steering.

Fits: 64, 65 & 66 Chevelles without tilt columns.

PART NUMBER: STE-4175

New turn signal lever for your 64, 65, or 66 Chevelle. This one features a black knob. Works great for all cars with a tilt steering column.

PART NUMBER: STE-4090

1964 - 1966 Chevelle Turn Signal Lever, Black Knob, For Cars without Tilt Steering Column

New turn signal lever for your 64, 65, or 66 Chevelle. This one features a black knob. Works great for all cars without a tilt steering column. Replaces original GM Part # 3783459 perfectly.

PART NUMBER: STE-4093

New turn signal switch for your 1964, 1965 or 1966 Chevelle. This unit is stamped "Guide" and works for cars WITHOUT TILT. Replaces GM # 911051.

Fits: 64, 65 & 66 WITHOUT TILT

PART NUMBER: STE-4183

1964 - 1966 Chevelle Turn Signal Switch, Stamped BPC for Models Without Tilt Steering

This is the real deal with steel / metal base housing. The cam is stamped BPC just like originals. This NEW turn signal switch fits 64, 65, and 66 non-tilt Chevelle models.

PART NUMBER: STE-4174

New turn signal switch for your 1964, 1965 or 1966 Chevelle for cars with tilt columns. Replaces GM part number 1993624.

Fits: 64, 65 & 66 WITH TILT

PART NUMBER: STE-4182

New clutch push rod for your Chevelle. This is the upper rod that goes through your firewall. From the pedal to Z bar.

Works great for all 64, 65, and 66 models with a manual transmission

PART NUMBER: CLU-4002

1964 - 1966 Chevelle Windshield Wiper Motor Hidden System 2 Speed Switch

This is the hidden wiper motor kit everyone has been looking for to clean up the firewall on your 1964 - 1966 Chevelle. Our hidden wiper motor system is a modern, high-quality replacement for the old system. It is the only replacement wiper system that is completely hidden, fitting entirely within the airbox in the cowl! This allows you to remove the stock wiper motor. The wiper motor hole in the firewall can be covered up with the cover plate supplied in the kit or you can weld in a patch panel to eliminate the hole entirely. Perfect for Pro Touring, resto mod cars or if you just desire a clean looking firewall. The kit comes complete less arms and blades. Your stock arms will fit on our system.

PART NUMBER: WIN-4051

1964 - 1966 Chevelle Windshield Wiper Motor Hidden System With Delay Switch

This is the hidden wiper motor kit everyone has been looking for to clean up the firewall on your 1964 - 1966 Chevelle. Our hidden wiper motor system is a modern, high-quality replacement for the old system. It is the only replacement wiper system that is completely hidden, fitting entirely within the airbox in the cowl! This allows you to remove the stock wiper motor. The wiper motor hole in the firewall can be covered up with the cover plate supplied in the kit or you can weld in a patch panel to eliminate the hole entirely. Perfect for Pro Touring, resto mod cars or if you just desire a clean looking firewall. The kit comes complete less arms and blades. Your stock arms will fit on our system.

PART NUMBER: WIN-4052

1964 - 1967 AC Oil Filler Cap Decal

New oil filler decal for your Chevelle or Nova. Works great for all 64 - 67 models. Correct red, white, and blue coloring and letter font.

PART NUMBER: STI-767

1964 - 1967 Chevelle & Nova Chevy II Chrome 4-Speed Shift Knob Ball, 9/16-18", Original Style

Chrome ball 9/16" thread, also call 1/2" sometimes, high quality with a stunning chrome finish. This shift knob has the recessed area where the threads start like original Chevelle shift knobs. Will work with any 9/16-18" shift arm, but is reproduced for the Muncie lock out (rabbit ear) shifters. Shift ball weighs 9 oz. with the threads cut right into the metal, no inserts to rip out. This is the correct shift ball for console equipped models.

Also fits some Corvette and Impala models.

PART NUMBER: CON-4110

1964 - 1967 Chevelle & Nova Chevy II White 4-Speed Shift Knob Ball, 9/16-18", Original Style

White ball 9/16" thread, also call 1/2" sometimes, high quality with 4-spd pattern in black. This shift knob has the recessed area where the threads start like original Chevelle shift knobs. Will work with any 9/16-18" shift arm, but is reproduced for the Muncie lock out (rabbit ear) shifters. This is the correct shift ball for non-console models.

Also fits some Corvette and Impala models.

PART NUMBER: CON-4111

Floor Shifter (4 Speed) (Bench Seat Car)(For Muncie Transmission Only)

PART NUMBER: CON-4019

9" Differential Housing With Axles (31 Spline) (Can Use OEM Brakes, Backing Plates Need to Have Center Hole Reamed Out to Fit Axle Flange)

PART NUMBER: SUS-4007

1964 - 1967 Chevelle Accelerator Throttle Rod, Holley, Big Block Chevy

New Big Block Holley throttle rod for your 1964, 1965, 1966 or 1967 Chevelle. This accelerator rod is bent in the right places and includes the bushings and pin. Measures 12 3/8".

Fits: 64, 65, 66 and 67 BB Chevelle's with Holley Carburetors.

PART NUMBER: ACL-4010

1964 - 1967 Chevelle Accelerator Throttle Rod, Quadrajet, Big Block

New Big Block Quadrajet throttle rod for your 1964, 1965, 1966 or 1967 Chevelle. This accelerator rod is bent in the right places and includes the bushings and pin. Measures 13 3/4".

Fits: 64, 65, 66 and 67 BB Chevelle's with Quadrajet Carburetors.

PART NUMBER: ACL-4011

1964 - 1967 Chevelle and 1968 - 1972 Nova Door Hinge Pins and Bushings Complete Set, 14 Pieces

New pin and bushing set to rebuild your door hinges. Does one car, all four door hinges.

Fits: 64, 65, 66, 67 Chevelle and 68, 69, 70, 71, 72 Nova

PART NUMBER: DWN-180

Shifter handle with release assembly. Great chrome plated die cast reproduction including black top push button. Replace your worn and abused original handle with this nice new piece.

Fits all 64, 65, 66 & 67 Chevelle models with floor shift automatic.

PART NUMBER: CON-4028

1964 - 1967 Chevelle Automatic Transmission Shifter Cable

New premium quality 1964, 1965, 1966 and 1967 shift cable for your Chevelle. Exact fit for all TH350 or TH400 automatic models with a floor shifter. Works great for all turbo 350, turbo 400, and even newer TH700-R4 , TH200-4R or 4L60 overdrive transmissions.

~~Fits 64, 65, 66, and 67 Chevelle models with a Turbo Hydra-Matic transmissions

PART NUMBER: TRA-4144

Axle (10 Bolt, 28 Spline)(29 1/2")(All Except El Camino And Wagon)

PART NUMBER: SUS-4001

Axle (12 Bolt, 30 Spline)(29 1/2")(All Except El Camino And Wagon)

PART NUMBER: SUS-4002

Body mount bolt kit (convertible)

PART NUMBER: SUS-4026

Body to frame cushions, 2 door convertible models. Frame Bushing Set fits: 1964, 64, 1965, 65, 1966, 66, 1967 and 67 Chevelle convertible models. Order you a set today and SAVE!

Note: Radiator support bushings sold separately.

PART NUMBER: SUS-4022

Body to frame cushions, 2 or 4 door hardtop or sedan, El Camino, and 2 or 4 door wagon. Frame Bushing Set fits: 1964, 64, 1965, 65, 1966, 66, 1967 and 67 Chevelle Hardtop and El Camino models. Order you a set today and SAVE!

Note: Radiator support bushings sold seperatly.

PART NUMBER: SUS-4025

Brake Assembly (Rear Axle, Drum Brakes) (Complete)

PART NUMBER: BRC-4087

1964 - 1967 Chevelle Brake Lines (rear axle, stainless steel), Pair

PART NUMBER: BRC-4081

1964 - 1967 Chevelle Brake Lines (rear axle, steel), Pair

PART NUMBER: BRC-4083

80/20 Loop Carpeted Floor Mat Set without logo for 64 - 67 Chevelle. Choose your color. Set includes all four mats, two front and two rear. Same OEM quality 80/20 blend as in our molded carpet sets. Color keyed bound edges with premium quality Griplock no-skid rubber backing.

Driver 29 1/8" x 23 3/8", Passenger 29 1/8" x 18 5/8", Rears 13 1/2" x 15 7/8".

PART NUMBER: INT-4093

New steering center drag link for your Chevelle. Exact fit for all 64 - 67 Chevelle models. New original factory style unit with exact details and fit, 7/8" diameter.

PART NUMBER: SUS-4053

1964 - 1967 Chevelle Center Emergency Parking Brake Cable, (All Except TH-400)

New center intermediate emergency parking brake cable for your 64 - 67 Chevelle. Exact fit for all models except if you have a Turbo 400 automatic transmission. Correct length with proper ends.

PART NUMBER: PKB-4006

1964 - 1967 Chevelle Chassis Bolt Kit, Small Block with Drum Brakes

New comprehensive chassis assembly fastener package, Correct for all 64, 65, 66 and 67 Chevelle SB models with Drum brakes. Kit Contains 331 pieces. Made in the USA.

PART NUMBER: HWR-4064

Complete wiring system for your 1964, 64, 1965, 65, 1966, 66, 1967 or 67 Chevelle model. Muscle Car Central offers a complete wiring harness to bring your classic muscle car into the 21st century and beyond. Imagine being able to install a single harness kit that contains all of the correct connections for every piece of your original equipment; AC, headlights, engine, column, all the way to the rear bumper, as well as having the option to add any of the top name accessories being offered. All this in a single kit! Including the correct connectors, factory fit plugs and terminals that are needed to make this a plug-n-play harness. You can rest assured that you are getting the most comprehensive and adaptive harness system on the planet bar none. If your electrical system requirements exceed the capabilities of your original wiring system, this is the perfect combination of modern high power output and installation ease. Premium quality American Autowire.

PART NUMBER: WIR-4340

NEW 1964 - 1967 Chevelle Clutch Fork Return Spring Set for all manual transmission models Big Block or Small Block. Each spring sets comes with the large clutch return spring that goes from the Z-Bar to the frame bracket as well as a small anti-rattle spring that goes from the Z-Bar to the clutch fork (on some applications) to keep the components from making noise. This clutch return spring fits 64, 65, 66, and 67 SB or BB Chevelle models.

PART NUMBER: CLU-4006

New clutch lower adjustment rod for your Chevelle. Exact fit for all 64, 65, 66, and 67 models. Fits models with a V8 engine and a manual transmission. This is the adjusting rod that lets your clutch fork engage.

PART NUMBER: CLU-20-CH

1964 - 1967 Chevelle Clutch Rod Boot Retainer

Clutch rod boot retainer

PART NUMBER: CLU-4015

New clutch Z bar frame bracket for your Chevelle. Welds to the drivers side frame rail.

Fits all 64, 65, 66, and 67

PART NUMBER: CLU-4003

1964 - 1967 Chevelle Clutch Z-Bar, Big Block

New manual transmission clutch Z-Bar for your Chevelle. Exact fit for all 64 - 67 models with a big block engine.

PART NUMBER: CLU-4005

1964 - 1967 Chevelle Clutch Z-Bar, Small Block

New manual transmission clutch Z-Bar for your Chevelle. Exact fit for all 64 - 67 models with a small block engine.

PART NUMBER: CLU-4004

1964 - 1967 Chevelle Complete Lower Firewall Panel

Complete Lower Firewall Panel for all 64, 65, 66 & 67 Chevelle models. This 1964, 1965, 1966, and 1967 Firewall is OE style and includes all the holes, fasteners, bends and slots of the original. We even matched the OE wrinkles. This is an important part since many other components are attached or related so you can count on our panels to fit correctly right out of the box.

~~Premium Quality Part at a great price!

PART NUMBER: SHE-4412

Complete Moser 12 Bolt Rear End with 11" Brakes (3.42 Ratio)

PART NUMBER: SUS-4004

Complete Moser 12 Bolt Rear End with 11" Brakes (3.73 Ratio)

PART NUMBER: SUS-4005

Complete Moser 12 Bolt Rear End with 11" Brakes (4.11 Ratio)

PART NUMBER: SUS-4006

Complete performance exhaust system from the headers back

PART NUMBER: FUE-4001

1964 - 1967 Chevelle Convertible Rear Arm Rest Ashtray Assembly, Each

New polished chrome two piece ash tray for your 1964, 1965, 1966 or 1967 Convertible Chevelle. These beautiful reproductions include the inside receptacle, bezel, lid and snap right into place. Spring included and sold as each and does left or right hand side.

Fits: 64, 65, 66 & 67 Convertible Chevelle, Super Sport and Malibu.

PART NUMBER: INT-4075

New transmission crossmember for your 1964 - 1967 CONVERTIBLE Chevelle. Fits the following transmissions: TH350, Muncie, Powerglide, T-10, 700R4, 4L60, 4L60E, super T-10, Saginaw, TH200. Finished in a black powder coat. Includes new mounting hardware.

Our NEW high performance G Force Chevrolet coupe transmission crossmember gives you the room to run a true dual exhaust system. This transmission crossmember has a double hump design, which gives you plenty of ground clearance!

Our A-body crossmember is a direct bolt on. Made from boxed tubing (1/8 in. thick) to handle the frame twisting power of your high performance small block, big block, or LS1, LS2, LS3, or LSX engine.

Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately part # TRA-724.

New transmission crossmember for your 1964 - 1967 CONVERTIBLE Chevelle. Fits the following transmissions: TH400 & 2004R. Finished in a black powder coat. Includes new mounting hardware.

Our NEW high performance G Force Chevrolet coupe transmission crossmember gives you the room to run a true dual exhaust system. This transmission crossmember has a double hump design, which gives you plenty of ground clearance!

Our A-body crossmember is a direct bolt on. Made from boxed tubing (1/8 in. thick) to handle the frame twisting power of your high performance small block, big block, or LS1, LS2, LS3, or LSX engine.

Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately part # TRA-724.

New replacement body mount bushing hardware set for your hardtop 1964, 1965, 1966 and 1967 Chevelle. Kit includes: 12 washers and 12 bolts.

Fits: Coupe 64, 65, 66 or 67 Chevelle, Super Sport, Malibu, El Camino, Cutlass and 442

PART NUMBER: SUS-4023

Lower portion of the cowl or firewall section for all 64, 65, 66 & 67 Chevelle models. If you only need the lower portion of the cowl section, this part can save you some money on that restoration.


PART NUMBER: SHE-4391

1964 - 1967 Chevelle Cowl Vent Grill Panel Screws

New cowl vent grill panel screws for your Chevelle. Correct dark grey phosphate coating. Exact fit for all 64, 65, 66 and 67 models. Sold in a 5 piece set. Please note that if these do not fit your cowl panel someone has enlarged or stripped out your cowl.

PART NUMBER: SHE-4385

New premium quality cowl panel for your Chevelle. Exact fit for all 64, 65, 66 & 67 Chevelle models. This is the panel that fits between your hood and windshield.

Part Number: SHE-4377

1964 - 1967 Chevelle Windshield Wiper Arms and Blades Kit for Coupes, Custom Black Finish

New custom windshield wiper arm and blade kit for your Chevelle. Exact fit for all 64 - 67 hardtop, coupe models. Includes both arms and both blades. Black finish for a custom look. These wiper arms and blades are made to OE sizes and specs for a perfect fit and function. The arms are 14 - 1/4 inches in length and blades are 15 inches in length. The only thing different than the originals is the black finish, order yours today!

Note: Use with WIN-75 Wiper Removal Tool

Fits all:
1967-1969 Camaro / Firebird ( Hardtop / Coupe )
1964-1967 El Camino
1964-1967 GTO / Buick / Olds / Cutlass ( Hardtop / Coupe )
1962-1972 Chevy Truck = All models
1961-1964 Impala ( Hardtop / Coupe )

Part Number: WIN-52B-CH

Roof dome light base for 64 - 67 models.

PART NUMBER: INT-529-CH

1964 - 1967 Chevelle Door and Inner Quarter Panel Insulation and Sound Dampening Kit

New exact fit sound barrier insulation for the doors and inner quarters of your 64 - 67 Chevelle. These door insulation kits provide the sound solution you have been looking for. Your Chevelle will remain cooler as these pads help prevent the transfer of heat to the interior of the vehicle. Backed with adhesive for easy installation. Whether you want to kill the unwanted noise coming from your doors or enhance the sound effects of your new sound system, this kit gets the job done.

**Fits ALL 64, 65, 66 and 67 Chevelle

**Note: Please review Technical tab for installation instructions.

PART NUMBER: INT-4260

Lower hinge to body bolt each for 64 65 66 67 Chevelle. Quality USA made reproductions. Available individually or in complete kits. Do your project right.

PART NUMBER: DWN-175-CH

Lower hinge to door bolt-phillips each. Quality USA made reproductions. Available individually or in complete kits. Do your project right. Fits 64 65 66 67 Chevelle.

PART NUMBER: DWN-177-CH

Upper door hinge bolt each. Quality USA made reproductions. Available individually or in complete kits. Do your project right. Fits all 64 65 66 67 Chevelle models

PART NUMBER: DWN-174-CH

New door hinge bolt set for your Chevelle. Exact fit for all 64 - 67 Chevelle. These are the correct bolts to mount your door hinges. Does all four, both uppers and lowers, left and right. Enough for one car. Made in the USA!

*Includes 24 pieces 6 ~ Phillips head style 18 ~ Regular Hex Bolt style

PART NUMBER: DWN-178-CH

New door jamb step sill plates for your Chevelle. Exact fit for all two door models. Features correct ribbed design and "Body By Fisher" emblem tags riveted as originals. Fits 64, 65, 66, and 67 cars.

PART NUMBER: INT-5415

1964 - 1967 Chevelle Emergency Parking Brake Cable Kit, OE Steel, All Except TH-400

New correct OEM style steel emergency parking brake set for your Chevelle. Exact fit for all 64 - 67 models except if your a Turbo 400 auto or if your running rear disc brakes. Excellent quality kit!

Please Note: This kit will NOT work for rear disc brake set ups.

PART NUMBER: PKB-4021

1964 - 1967 Chevelle Emergency Parking Brake Cable Kit, Stainless Steel, All Except TH-400

New correct style Stainless Steel emergency parking brake set for your Chevelle. Exact fit for all 64 - 67 models except if your a Turbo 400 auto or if your running rear disc brakes. Excellent quality kit!

Please Note: This kit will NOT work for rear disc brake set ups.

PART NUMBER: PKB-4022

New emergency parking brake release handle for your Chevelle. Exact fit for all 64, 65, 66, and 67 models.

PART NUMBER: PKB-4004

New small block engine frame mounts for your Chevelle. Exact fit for all 64, 65, 66 or 67 SB engines; 283, 327, 350, etc. Superior quality for your Chevelle restoration. Sold as a matched pair only.


PART NUMBER: ENC-4195

1964 - 1967 Chevelle Engine Temperature Sending Unit with Gauges

Temperature Sending Unit (Cars with Factory Gauges)

PART NUMBER: RAD-61-CH

New Vee flaged fender emblem for your classic. Excellent quality plating and coloring details.

PART NUMBER: EMB-40-CH

New Vee flaged fender emblem for your 1964 - 1967 Chevelle. Excellent quality plating and coloring details. Sold as a pair

PART NUMBER: EMB-41-CH

Clutch rod boot (on firewall)

PART NUMBER: CLU-4014

Left hand toe board. Used to repair the area in front of your floor pan curving up toward the firewall. Correct for all 64 - 67 Chevelle models.

TOE BOARD (FLOOR TO FIREWALL PAN) 31" X 16" LH. 64, 65, 66, 67 Chevelle

PART NUMBER: SHE-4407

Right hand toe board. Used to repair the area in front of your floor pan curving up toward the firewall. Correct for all 64 - 67 Chevelle models.

TOE BOARD (FLOOR TO FIREWALL PAN) 31" X 16" RH. 64, 65, 66, 67 Chevelle

PART NUMBER: SHE-4408

Firewall pad with plastic retainers. Fits all 64, 65, 66, 67 models.

PART NUMBER: INT-4602

1964 - 1967 Chevelle Floor Carpet Set, Original Style Loop Material
Made in the U.S.A.

New factory style carpet in your choice of color for all 64, 65, 66, and 67 Chevelles. Premium quality design and construction. Includes attached back side jute padding. All correct factory color matches, pre-molded to fit your floor using correct 80/20 loop material as original GM. Correct heel pad, stitching and dimmer switch grommet. Please don't forget to choose your color option from drop-down menu. Four speed models will have the correct raised shifter hump provision. Order yours today!!

PART NUMBER: INT-4088

1964 - 1967 Chevelle Floor Insulation and Sound Dampening Kit

New exact fit sound barrier insulation for the floor of your 64 - 67 Chevelle. The floor of your car is a amplifier of all unwanted sound and vibrations along with excessive exhaust heat. These floor insulation kits provide the sound and thermal solution you have been looking for. Your Chevelle will remain cooler as these pads help prevent the transfer of heat to the interior of the vehicle. Backed with adhesive for easy installation. Whether you want to kill the unwanted noise coming form your car or shield yourself from unwanted heat, this kit gets the job done.

**Fits ALL 64, 65, 66 and 67 Chevelle

**Note: Please review Technical tab for installation instructions.

PART NUMBER: INT-4262

Floor insulation

PART NUMBER: INT-4083

Floor Pan (Full 1 Piece Including Under Rear Seat Pan)

PART NUMBER: SHE-4102

1964 - 1967 Chevelle Floor Pan, Left Half, 27" x 60"

PART NUMBER: SHE-4097

Floor Pan, Right Half, 27" x 60"

PART NUMBER: SHE-4101

Complete OE style coverage for replacement of entire floor. This one-piece pan has all the shapes, contours and holes as original. Includes floor pan braces, inner rockers and seat belt provisions already welded in place. This high quality floor is made on New tools. If you are looking for true OE style replacement then this pan will be hard to beat. Floor Pan, With Braces 77" Long x 60" Wide. Full 1 Piece Including Under Rear Seat Pan.

PART NUMBER: SHE-4104

1964 - 1967 Chevelle Floor Panel Wire Channel Cover Brace

New heavy steel floor panel wiring channel cover brace for your 1964, 1965, 1966 or 1967 Chevelle. This heavy gauge stamped steel wire routing channel is designed to protect the wires running across your floor pan and under the seat. This channel is EDP-coated for protection and features all of the correct contours for a perfect fit.

Fits 64, 65, 66 and 67 Chevelle, Super Sport and Malibu models.

PART NUMBER: SHE-4416

1964 - 1967 Chevelle Floor Panel, Front LH Section

New correct design floor pan section for 1964, 1965, 1966, and 1967 Chevelle models. This one is for the front, left hand, driver side. Measures 36 inches from the flat where the toe starts to go up back toward the front of your seat box. Toe board portion is about 5 inches where it goes up toward your firewall.

PART NUMBER: SHE-4110L

1964 - 1967 Chevelle Floor Panel, Front RH Section

New correct design floor pan section for 1964, 1965, 1966, and 1967 Chevelle models. This one is for the front, right hand, passengers side. This floor pan feature a portion of the transmission tunnel. Toe board portion is about 5 inches where it goes up toward your firewall.

PART NUMBER: SHE-4110R

1964 - 1967 Chevelle Floor Panel, Rear RH Section

New, RH Passenger Side Rear Floor Pan for 64, 65, 66, and 67 Chevelle models. This repair panel patch fixes rust issues where you put your feet in the back seat. Our 1964 - 1967 rear floor repair panel approximately measures 30" W X 34.5" L.

PART NUMBER: SHE-4099

Floor shift lever release button (with automatic transmission)

PART NUMBER: CON-4023

Floor Shift Lever Release Button Spring (Automatic Transmission)

PART NUMBER: CON-4027

1964 - 1967 Chevelle Floor Shifter Metal Tunnel Hump, 4 Speed with Console

New floor shifter metal tunnel hump for your 1964 - 1967 Chevelle. Exact fit for all 4 speed models that do have a console. Measures about 10 inches by 10 inches.

PART NUMBER: SHE-4100

1964 - 1967 Chevelle Floor Shifter Metal Tunnel Hump, 4 Speed without Console

New floor shifter metal tunnel hump for your 1964 - 1967 Chevelle. Exact fit for all 4 speed models that do not have a console. Measures about 9 inches by 11 inches.

PART NUMBER: SHE-4096

1964 - 1967 Chevelle Floor, Doors, Quarters, and Roof Heat Sound Deadener Insulation Set, ULTA-MAT Sound Deadening

New complete sound deadener kit mat for your 1964 - 1967 Chevelle. Correct fit for all 64 - 67 Chevelle models. This is a brand new extra light weight material that preforms. The pre-cut pieces make it a breeze to install! Now you can get a premium quality sound and heat barrier and a great price. These kits are pre-cut for your 1964-1967 Chevelle and have advanced light weight sound deadening technology. Kit come with detailed instructions to make for a hassle free installation. This complete set includes pieces for the floor, doors, quarter, and roof panels.

This is a flexible & lightweight foil facing foam rubber sound & heat insulation material. It is a soft, self-adhesive semi-closed cell foam rubber. The foil facing help to reflect the heat radiation, and the foam rubber "cell" structure help to reduce heat and noise.
Resist temperature up to 160℃ （320℉）

Order your complete Floor, Doors, Quarters, and Roof Heat ULTA-MAT Sound Deadener Set today and SAVE! Complete kit that's easy to install.

Great lightweight kit to help lessen road noise and heat.

Part Number: INT-5966

1964 - 1967 Chevelle FRONT ACDeclo Advantage Gas Shock

New front ACDelco Shock for your 1964, 1965, 1966 and 1967 Chevy Chevelle. Perfect fit for all 64, 65, 66,and 67 models. AC-Delco Front are sold individually. Get an outstanding ride and handling with our ACDelco Advantage Gas-Charged Shocks.

~Engineered for comfort and control
~Nitrogen gas charged for superior response
~Nitrogen gas pressure also reduces resistance, resulting in a softer ride
~Electrostatic paint allows for excellent coverage and better corrosion resistance in hostile environments
~O-ring piston seal provides a positive hydraulic seal, allowing little blow-by of fluids, helping improve resistance and predictability of the damping response
~Manufactured from quality materials and processes

PART NUMBER: SUS-4510

1964 - 1967 Chevelle Front and Rear Panel Arm Rest Base Screw Set

New COMPLETE front and rear arm rest base mounting hardware for your 1964. 1965, 1966 or 1967 Chevelle. This new arm rest base screw set is the correct length for all 64, 65, 66 & 67 Chevelle models. Comes pre bagged in 10 piece set.

Fits: 64, 65, 66 & 67 Chevelles

PART NUMBER: INT-4610

New premium quality pair of front arm rest bases for 1964, 1965, 1966 and 1967 Chevelles. These chrome plated bases are meant to last and are far superior to other vacuum metalized bases on the market.

Also Fits:

64-67 El Camino (Front)
62-64 Nova (Front)
61-67 Pontiac GTO, Tempest and Lemans (Front)
64-67 Oldsmobile Cutlass/442 (Front)
64-67 Buick Skylark (Front)

PART NUMBER: INT-4598

1964 - 1967 Chevelle Front Emergency Parking Brake Cable, (All Except TH-400)

New front emergency parking brake cable for your 64 - 67 Chevelle. Exact fit for all models except if you have a Turbo 400 automatic transmission. Correct length with proper end and threaded rod.

PART NUMBER: PKB-4005

New correct style Stainless Steel front end bolt set for your Chevelle. This bolt kit is made of 18-8 stainless and black oxide coated to resemble an original look. Exact fit for all 64 - 67 models. Includes oe type black indented hex head pinch point bolts, cage nuts, fender washers, hood, header panel, valance panel, fenders, inner fenders and grille hardware. Stop looking for your bolts, here they are. This kit has 153 pieces.

PART NUMBER: SHE-4600A

New correct style front end bolt set for your camaro. Exact fit for all 64 - 67 Chevelle models. Includes oe type black indented head pinch point bolts, cage nuts, fender washers, hood, header panel, valance panel, fenders, inner fenders and grille hardware. Stop looking for your bolts, here they are.


PART NUMBER: SHE-4600

1964 - 1967 Chevelle Front Flex Hose for Drum Brakes, Stainless Steel

New front brake flex hose for your 64 - 67 Chevelle. Exact fit for all models with front drum brakes. Two required per car, sold as each. Done in high grade braided stainless steel.

PART NUMBER: BRC-4088

1964 - 1967 Chevelle Front Interior Upper Windshield Trim, Black

New interior front window headliner trim for your Chevelle. Exact fit for all 64, 65, 66, and 67 hardtop models. Features the right contour and bends. Ribbed texture like originals. Comes black in color and can easily be dyed or painted if needed. Designed and made in the USA! Replaces original GM Part # 4417032 perfectly.

Fits all models including hardtop, post sedan, and even El Caminos

PART NUMBER: INT-4932

1964 - 1967 Chevelle Front LH Drum Brake Wheel Cylinder

1964 - 1967 Chevelle Front RH Drum Brake Wheel Cylinder

1964 - 1967 Chevelle Front Rubber Flex Hose for Drum Brakes, Each

New front rubber flex hose for your Chevelle. Exact fit for all 64 - 67 models with front drum brakes. Two required per car, sold as each.

PART NUMBER: BRC-4078

1964 - 1967 Chevelle Front Spiral Shock, OE Style with No Part Number or Lettering Stampings

New original style front shock for your Chevelle. Exact fit for all 64, 65, 66, and 67 models. Correct gray coloring. This version does not have any part number stampings or lettering stamped at all. Get the right look with this old school style shock today.

PART NUMBER: SUS-4220

1964 - 1967 Chevelle Fuel Gas Tank Filler Neck Hose with Tower Clamps, GM Markings, El Camino & Station Wagon

New correct design fuel tank hose for your Chevelle. Exact fit for all 64, 65, 66 & 67 El Camino and station wagon models. This hose goes from your fuel tank to the fuel filler neck. Both tower clamps are included to make the connection. Includes GM ink markings just like originals.

PART NUMBER: FUE-13-CH

Fuel Line (3/8, Pump to Tank) (2 Door Hardtop) (Stainless Steel)

PART NUMBER: FUE-4034

Fuel Line (3/8, Pump to Tank) (Convertible or El Camino) (Stainless Steel)

PART NUMBER: FUE-4044

Fuel Line (3/8, Pump to Tank) (Convertible or El Camino)

PART NUMBER: FUE-4043

Fuel Line (5/16, Pump to Tank) (2 Door Hardtop) (Half Moon Over Rear Axle) (Stainless Steel)

PART NUMBER: FUE-4036

Fuel Line (5/16, Pump to Tank) (2 Door Hardtop) (Half Moon Over Rear Axle)

PART NUMBER: FUE-4035

Fuel Line (5/16, Pump to Tank) (2 Door Hardtop) (Square at Rear Axle) (Stainless Steel)

PART NUMBER: FUE-4038

Fuel Line (5/16, Pump to Tank) (2 Door Hardtop) (Square at Rear Axle)

PART NUMBER: FUE-4037

Fuel Line (5/16, Pump to Tank) (Convertible or El Camino) (Square at Rear Axle) (Stainless Steel)

PART NUMBER: FUE-4042

Fuel Line (5/16, Pump to Tank) (Convertible or El Camino) (Square at Rear Axle)

PART NUMBER: FUE-4041

Fuel Line (5/16, Pump to Tank) (Convertible) (Half Moon Over Rear Axle) (Stainless Steel)

PART NUMBER: FUE-4040

Fuel Line (5/16, Pump to Tank) (Convertible) (Half Moon Over Rear Axle)

PART NUMBER: FUE-4039

New front to rear main fuel line clip set for your Chevelle. These are the clips to mount the long main gas line that runs from your fuel tank area all the way to the engine block fuel pump. Fits all 3/8 inch diameter fuel lines. Sold as a complete five piece set. Easy install, just pushes into the frame.

Fits 64, 65, 66, 67, 1964, 1965, 1966, and 1967

PART NUMBER: FUE-4048

New front to rear main fuel line clip set for your Chevelle. These are the clips to mount the long main gas line that runs from your fuel tank area all the way to the engine block fuel pump. Fits all 5/16 inch diameter fuel lines. Sold as a complete five piece set. Easy install, just pushes into the frame.

Fits 64, 65, 66, 67, 1964, 1965, 1966, and 1967

PART NUMBER: FUE-4047

New front to rear main fuel line for your Chevelle. This is the long main gas line that runs from your fuel tank area all the way to the engine block fuel pump. Larger 3/8 inch diameter in original style steel. Exact fit for all two door hardtop models.

Fits 64, 65, 66, 67, 1964, 1965, 1966, and 1967

PART NUMBER: FUE-4028

1964 - 1967 Chevelle Fuel Tank Vent Line, OE Steel

This 64 - 67 Chevelle Fuel Tank Vent Line allows the air inside the tank to escape as it is filled up. This line also prevents pressure from building up due to temperature changes. Features correctly flared ends, and bends, just as original.

~~Manufactured from Original Style Material

PART NUMBER: FUE-4045

1964 - 1967 Chevelle Fuel Tank Vent Line, Stainless Steel

This 64 - 67 Chevelle Fuel Tank Vent Line allows the air inside the tank to escape as it is filled up. This line also prevents pressure from building up due to temperature changes. Features correctly flared ends, and bends, just as original.

~~Manufactured from Stainless Steel Material

PART NUMBER: FUE-4046

1964 - 1967 Chevelle Gas Fuel Tank Anti Squeak Body Pad Mat

New gas tank Anti Squeak Body Insulator Pad for your 1964 - 1967 Chevelle. Exact fit for all 64, 65, 66, and 67 models. Black rubber pad. Same thickness as original, pad goes between the body and fuel tank serves as an insulator. This pad will reduce and eliminate squeaking and vibration.

PART NUMBER: FUE-4132

1964 - 1967 Chevelle Gas Fuel Tank Straps, Pair

New pair of gas tank straps for your Chevelle. Exact fit for all 64, 65, 66, and 67 models (except station wagon or El Camino).

PART NUMBER: FUE-4032

Gas Tank (Stainless Steel) (Fits All Models Except Wagon and El Camino)

PART NUMBER: FUE-4049

1964 - 1967 Chevelle GM A-Body StreetGRIP Delrin Control Arm Bushings Set

OEM rubber control arm bushings allow too much deflection on the control arms. Polyurethane bushings resist smooth rotation and impose stiction. Delrin bushings eliminate the deflection AND the stiction, leading to a huge improvement in both ride quality and handling. Fits 64 - 67 Chevelles.

Download product details and installation instructions below:
(pdf, 205 Kb) [Download]

Part Number: SUS-4434

1964 - 1967 Chevelle GM A-Body TruLink Rear Suspension System Kit

New ground wire for your Chevelle. This handy wire does your voltage regulator or dash instrument gauge cluster. This wiring harness is the proper length with eyelets. Two required per car for all 64, 65, 66, and 67 Chevelle models.

PART NUMBER: ALT-31

1964 - 1967 Chevelle Windshield Wiper Arms for Coupe Models, Stainless Steel, Pair

New excellent quality windshield wiper arm assemblies for your 64 - 67 Chevy Chevelle. Fits all 1964 - 1967 Hardtop Coupe models. These new polished stainless steel arms measures about 14 - 1/4" inches in length. The wiper arm stainless steel material is polished to a bright finish. Factory correct bayonet style slide on connection where your wiper blade mounts. Sold as a pair.

Note: Use with WIN-75 Wiper Arm Removal Tool

Also Fits:
1964-1967 El Camino
1964-1967 Pontiac LeMans GTO / Buick / Olds / Cutlass ( Hardtop / Coupe )
1962-1972 Chevy Truck = All models
1961-1964 Impala ( Hardtop / Coupe )

PART NUMBER: WIN-67-CH

Headlamp Adjuster Kit for your 1964, 1965, 1966 or 1967 Chevelle. This kit does the entire car. Includes 4 springs, 8 adjust bolts and 8 nuts.

PART NUMBER: HDL-2006A

Unlike generic or late model headlight adjust springs offered elsewhere. This correct headlamp capsule spring may be a small part, but it sure makes installation simple. Exact fit for all 1964, 1965, 1966 and 1967 Chevelle models. Four required per car. Sold as each.

Fits: 64, 65, 66 and 67 Chevelle and Malibu models.

PART NUMBER: HDL-2008-CH

1964 - 1967 Chevelle Headlight Switch Mounting Nut

New dash headlight switch mounting nut for your Chevelle. Exact fit for all 1964 - 1967 models.

PART NUMBER: DAS-2034C

1964 - 1967 Chevelle Heater Air Conditioning Box Delete Plate, Premium Quality Fiberglass

Air conditioning delete panel for 1964 - 1967 Chevelle models. Allows you to retain heater/defroster, but eliminates AC functions. Increases space on right hand side of engine bay for headers and valve covers clearance. Stock Factory AC Heater Core tubes pass through the holes in this Fiberglass Box. Exterior is primed in white which creates a great base for any color paint. This plate allows the heater function to operate and offers a much cleaner look. Fits all 64, 1964, 65, 1965, 66, 1966, 67 and 1967 Chevelle factor air conditioning models. Holes marked in factory location. (YOU WILL NEED TO DRILL THE HOLES FOR THE FAN AND TO MOUNT TO THE FIRE WALL) Also allows use of FACTORY AC fan and mounting hardware. If you ever need to replace your heater core, just order one for a factory AC model and this AC delete box will do the rest. Order yours today!

Fits: 64, 65, 66 67 Chevelle, El Camaino

*For use on FACTORY AIR CONDITIONED MODELS ONLY

PART NUMBER: HTR-4063

New heater core assembly for your Chevelle. Exact fit for all models with air conditioning. This is a new old stock copper version. It is the last one available. Get it before it's too late.

Fits all 64, 65, 66, and 67 with A/C

PART NUMBER: HTR-4019

1964 - 1967 Chevelle Heater Core, Without Air Conditioning

New 64, 65, 66, and 67 Chevelle Heater Core for Non-Air models. Fits all non-air Small Block SBC or Big Block BBC models.

Construction: Aluminum Tank, Aluminum Core
Core Width (In): 6-3/8 Inch
Core Height (In): 9-1/2 Inch
Core Depth (In): 2-1/2 Inch
Inlet Hose Diameter (In): 5/8 Inch
Outlet Hose Diameter (In): 3/4 Inch
Core Size (In): 9-1/2 X 6-3/8 X 2-1/2 Inch

PART NUMBER: HTR-4018

Heater seal kit (with air conditioning)

PART NUMBER: HTR-4021

Heater to firewall gasket (under dash, without air conditioning)

PART NUMBER: HTR-4020

Heater to firewall gasket (under hood, without air conditioning)

PART NUMBER: HTR-4022

Premium quality molded rubber hood to cowl seal for your 1966 or 1967 Chevelle. This highly recommended replacement part is engineered like original and provides quality seal between the outside and your engine compartment. Quality replacement part and a great price!

Fits: 66 & 67 Chevelle

PART NUMBER: WEA-4148

1964 - 1967 Chevelle Hurst Four Speed Chrome Shifter Handle

New Chrome Shifter Handle with HURST Text for your Chevelle. This handle is made for most Hurst Competition Plus Shifters. The 11.12" long shifter handle lever is designed for the 64, 65, 66, and 67 Chevelle models. The chrome handle has the two lower bolts for easy on and off. Features a rectangular handle design with the Hurst name stamped in the side. Official licensed Hurst product.

3/8 -16 thread

PART NUMBER: TRA-4555

1964 - 1967 Chevelle Hurst Four Speed Shifter Assembly, Competition Plus, Muncie

New complete shifter assembly for your Chevelle. Exact fit for Muncie 4 speed transmissions. This very popular Hurst Competition Plus shifter is designed for the 64, 65, 66, and 67 Chevelle models Chrome handle has the two lower bolts for easy on and off. Features a rectangular handle design with the Hurst name stamped in the side. Includes a white hurst shifter knob with the engraved 4-speed pattern. Official licensed Hurst product.

Fits for both with and without floor consoles.

PART NUMBER: TRA-4550

Idler arm (with 7/8" diameter center link)

PART NUMBER: SUS-4052

1964 - 1967 Chevelle Inner Rocker Panel, Left Hand

New original style inner rocker panel for your Chevelle. Exact fit for all 64 - 67 models. This one is for the left hand, drivers side. Correct shape, size, and bends. Order yours today!

PART NUMBER: SHE-4268

1964 - 1967 Chevelle Inner Rocker Panel, Right Hand

New original style inner rocker panel for your Chevelle. Exact fit for all 64 - 67 models. This one is for the right hand, passengers side. Correct shape, size, and bends. Order yours today!

PART NUMBER: SHE-4269

1964 - 1967 Chevelle Intermediate Front to Rear Harness

New premium quality intermediate wire harness for your 1964, 1965, 1966 or 1967 Chevelle. Exact fit for all hardtop - coupe and convertible models. This harness runs from your under dash main toward the rear and connects with the tail light wiring. Ribbon style harness with 7 prongs.

Fits: 64, 65, 66 & 67 Coupe and Convertible Chevelle

PART NUMBER: WIR-4350

New kick panel insulation set for your Chevelle. Exact fit fort all 64 - 67 models. These pre-cut insulation pads will help keep your Chevelle cool and quiet. From the factory these pads are glued to the back side of your kick panels. Sold as a pair and recommended for those who are replacing their kick panels.


PART NUMBER: INT-5402

1964, 1965, 1966 and 1967 Chevelle front KYB gas shocks. Sold each. KYB gas adjust shocks provide excellent control and comfort. Engineered for today's driving. Includes upper hardware.

PART NUMBER: SUS-4055

1964 - 1967 Chevelle KYB "Gas-a-just" Shock Absorber, Rear

1964, 1965, 1966 and 1967 Chevelle rear KYB gas shock. Sold each. KYB gas adjust shocks provide excellent control and comfort. Engineered for today's driving. Includes lower hardware.

Detailed Description

• High Pressure Monotube Gas Shock;
• Adds up to 25% more damping performance over original equipment shocks
• Components and valving designed specifically for classic cars
• High gas pressure design provides instant, extra control
• monotube design outperforms all other standard shock absorbers
• Unique, air-free, hydraulic unit eliminates performance fade

New lower injected-molded shift boot for your 1964-1967 Chevelle. This boot is sealed down by a rubber ring (CON-4024) to the floor of the car.

Fits: 64, 65 and 66 models WITH a console
Fits: 64,65, 66 and 67 models WITHOUT a console

PART NUMBER: CON-4018

New lower sliver cadmium plated shift boot retainer ring for your 1964-1967 Chevelle. This ring seals your rubber shift boot to the floor of the car.

Fits: 64, 65 and 66 models WITH a console
Fits: 64,65, 66 and 67 models WITHOUT a console

PART NUMBER: CON-4024

1964 - 1967 Chevelle Muncie Four Speed Shifter Handle Conversion Adapter T for Hurst Shifters

New Shifter Handle Adapter for your 64-67 Chevelle. This bracket allows you to bolt up your original Muncie shifter handle to a Hurst shifter. Once you install your shifter boot, no one will know it isn't stock. This Custom Shifter Adapter is perfect to complete the handle conversion. Made In The USA. This adapter bracket is made for most original 64, 65, 66, and 67 Muncie shifters handles to fit a Hurst Competition Plus Shifters.

Note: This adapter will raise the height of the handle approximately 1/2" from stock. Might interfere with factory consoles.

PART NUMBER: TRA-4558

1964 - 1967 Chevelle Outer Rocker Panel, Left Hand

New original style outer rocker panel for your Chevelle. Exact fit for all 64 - 67 models. This one is for the left hand, drivers side. Correct shape, size, and bends. Order yours today!

PART NUMBER: SHE-4267