 |
 |
 |
|
1970 - 1972 Chevelle Power Window Conversion Kit, Complete, Manual to Power Conversion, USA Made
New premium quality power window kit for your Chevelle. Exact fit for all 70, 71, and 72 2 door models. Includes everything to change your crank window car over to the ease of power. Does both driver and passenger door glasses and both quarter glasses. Super easy to install set includes; all regulators, wiring harnesses with door rubber boots, and all switches. Switches have square corners, you can upgrade to the old style rounded corner switches if desired. This made in the USA kit is the finest on the market.
*See Technical Specs for switch options and pricing.
~~NOTE: This is not a universal cheap imported power window kit. This kit is specifically made for your 1970-1972 Chevelle right here in the USA! Please double check your options as each kit is especially made for you and are non-refundable.
Kit includes: 4 regulators (front left & front right side)(rear left & rear right side), 4 new ACI motors, completed wire harness, choice of switches, and conduit to protect the wires going thru the door.
PART NUMBER: DWN-4088
- (402) Door Mount, Plastic: Bezel: Quad: length = 4-7/16"; height = 1-13/16", Single: length = 2" height = 1-3/4", Hole Size: Quad; length = 3-13/16; height = 1-1/4". Single: length = 1-3/8"; height = 1-1/4".
(408) Door Mount, OE Style: Bezel: Double: length = 2-1/2"; height = 1-7/8" Single; length = 1-11/16"; height = 1-3/4" Hole: Double: Length = 2-3/8"; Height = 1-3/8" Single: length = 1-5/8"; height = 1-1/4" Looks like Factory Original Style
(414) Door Mount, NU-CRANKS SWITCH (USE YOUR ORIGINAL WINDOW CRANK): GM Large Round Spline - Shorter Length: Switch Housing: 2-1/4" x 3" Shaft Length" 7/8" (to include housing 1-1/2") Spline OD: 29/64" (.453) Spline ID: 7/16" (.437). Looks like cranks, but its a switch!
(404) Console Mount, Chrome Plastic: Bezel: Quad: length = 4-7/16"; height = 1-13/16". Hole Size: Quad: length = 3-13/16"; height = 1-1/4". Custom Look!
(406) Console Mount, BLACK ILLUMINATED: Bezel: Double length = 2"; height = 1-13/16". Hole Size: Double: length = 1-13/16"; height = 1-5/8". Custom Look!
(410) Console Mount, Chrome Metal: Bezel: Quad: length = 4-1/4"; height = 1-7/8". Hole Size: Quad: length = 4-1/16"; height = 1-1/4". Custom Look!
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 70, 71 and 72 Chevelle SPECIFIC- bolt into original mounting holes
- Uses Stock Channels
- New AC Delco OEM Motors
- Made of 1018 cold roll steel
- Brass oilite thrust bearings at pivots
- Treated gear plates for longer teeth life
- Kits include power window switches / completed wire harness and conduit
- Upgrade to O.E. Heavy Chrome Switches
- One year warranty against manufacture defects on regulators and motors. (Warranty requires copy of sales receipt or invoice)
|
|
|
|
|
|
|
