Home > Chevelle Parts > Chevelle Gift Shop
Sort By:
Page of 2
Outdoor Portable Showcase Car Shelter, 10" Pitched
Outdoor Portable Showcase Car Shelter, 20' X 10' X 7' (10' Max at Peak)
Our Price: $3,995.95
Sale Price: $3,899.95
You save $96.00!

Outdoor Portable Showcase Car Shelter with Pitched Roof 10' High

This 20' Outdoor ShowCase is perfect for all Chevelle or Nova models. The best just keeps on getting better. CarCapsule USA does it again, with another addition to our dynamic list of vehicle storage solutions. The Outdoor ShowCase is the solution to winter hibernation, and general outdoor storage challenges for classic and muscle car owners throughout the world. The Outdoor ShowCase keeps your classic car protected from the elements for a fraction of the cost of building a garage or carport. No Permits, No Contractors, and Best of all it’s portable.

Overall Size 20'X10'X7' (10' Max at Peak)

The High CFM Fan and washable charcoal filter will keep dust, dirt, and insects out, maintaining a pristine environment inside your Showcase for years to come. Easy as 1-2-3, simply layout the Outdoor ShowCase, attach the pump and inflate it. No assembly required, No metal or plastic frame. The Outdoor Showcase sets up in about 10 minutes.

PART# GIF-707
ShowCase CarCapsule Touchless Car Cover 20'
ShowCase CarCapsule Touchless Car Cover Protection System, 20 Foot
Our Price: $1,995.95
Sale Price: $1,949.95
You save $46.00!

ShowCase CarCapsule Touchless Car Cover Protection System, 20 Foot

This 20' ShowCase is perfect for your Chevelle or Nova. ShowCase is an ultra-premium vehicle storage shelter, and the next evolution of Car Capsule technology. The luxury ShowCase seals your treasured vehicle away from dings, dust, dirt, corrosion, mildew, musty odors, and pests, while presenting it in a show quality display. Described as a “Touchless Car Cover”, ShowCase provides ultimate protection, yet never touches the vehicle. ShowCase is supported by patented heavy duty and resilient inflatable air columns, and features a front panel which zips open and away, allowing the vehicle to simply be driven in or out.

ShowCase uses CarCapsule’s proven Evaporative Storage System (E.S.S.) technology, which exchanges air inside the ShowCase with filtered outside air 3-5 times every hour, keeping the temperature inside consistent with the temperature outside and eliminating moisture that could condense on the vehicle.

This 20 foot ShowCase measures: 18' 8"- 200" x 111" x 78" (Length x Width x Height)

The Indoor Showcase is an ultra-premium 24/7-365 days a year, vehicle storage solution. The next evolution of CarCapsule™ technology. It’s Form and Function All in One! Designed with the true classic car enthusiast in mind as a solution for maintaining that “showroom shine” all year-round, the Showcase is a free-standing, drive-in, drive-out access storage for your prized car, truck, or motorcycle.

The High CFM Fan and washable charcoal filter will keep dust, dirt, and insects out, maintaining a pristine environment inside your Showcase for years to come. Easy as 1-2-3, simply layout the ShowCase, attach the pump and inflate it. No assembly required, No metal or plastic frame. The Showcase sets up in about 4 minutes.

PART# GIF-704
ShowCase CarCapsule Touchless Car Cover 18'
ShowCase CarCapsule Touchless Car Cover Protection System, 18 Foot
Our Price: $1,795.95
Sale Price: $1,749.95
You save $46.00!

ShowCase CarCapsule Touchless Car Cover Protection System, 18 Foot

This 18' ShowCase is perfect for your classic Chevelle or Nova. ShowCase is an ultra-premium vehicle storage shelter, and the next evolution of Car Capsule technology. The luxury ShowCase seals your treasured vehicle away from dings, dust, dirt, corrosion, mildew, musty odors, and pests, while presenting it in a show quality display. Described as a “Touchless Car Cover”, ShowCase provides ultimate protection, yet never touches the vehicle. ShowCase is supported by patented heavy duty and resilient inflatable air columns, and features a front panel which zips open and away, allowing the vehicle to simply be driven in or out.

ShowCase uses CarCapsule’s proven Evaporative Storage System (E.S.S.) technology, which exchanges air inside the ShowCase with filtered outside air 3-5 times every hour, keeping the temperature inside consistent with the temperature outside and eliminating moisture that could condense on the vehicle.

This 18 foot ShowCase measures: 18' 8"- 200" x 111" x 78" (Length x Width x Height)

The Indoor Showcase is an ultra-premium 24/7-365 days a year, vehicle storage solution. The next evolution of CarCapsule™ technology. It’s Form and Function All in One! Designed with the true classic car enthusiast in mind as a solution for maintaining that “showroom shine” all year-round, the Showcase is a free-standing, drive-in, drive-out access storage for your prized car, truck, or motorcycle.

The High CFM Fan and washable charcoal filter will keep dust, dirt, and insects out, maintaining a pristine environment inside your Showcase for years to come. Easy as 1-2-3, simply layout the ShowCase, attach the pump and inflate it. No assembly required, No metal or plastic frame. The Showcase sets up in about 4 minutes.

PART# GIF-703
1970 - 2017 CarCapsule Clear Bubble System
CarCapsule Clear Bubble Car Cover Protection System, 18 Foot
Our Price: $469.95

CarCapsule Clear Bubble Car Cover Protection System, 18 Foot

Your classic car is timeless and it deserves world class protection. This 16' Capsule is perfect for your Chevelle or Nova. You’ll find the CarCapsule car bubble system is a great way to keep your classic car protected. far exceeds the “old school” multi-layer car cover in terms of protection. The Car-Capsule is EASY as 1, 2, 3 to use! You won't believe it and that's just an added bonus when you see how well your car is locked away from the elements like corrosion, rust, dust, dirt, dings and even finger prints. The indoor capsule is a clear vinyl bubble that completely seals and protects your car from the elements that we all fear. It will leave you with the assurance that your investment is well protected. The indoor vinyl "bubble" is a 10 mil. anti-static, double-polished, radio frequency welded, 100 per cent PVC dream come true. It's so strong that you could accidentally drop a 5 pound hammer on it and it will bounce right off! The zipper is heavy duty 100 per cent nylon and will not scratch your vehicle. The material is 18 ounce Herculite and is impervious to oil, gas and antifreeze. It is also abrasion-resistant, mildew resistant and will not support a flame. There are so many remarkable things about the CarCapsule that we can safely say that there is nothing like it on the market.

Perfect for 1970-2018 models this 18 foot bubble measures: Length = 18' (216") Width = 6'-6" (78") Height = 5'-8" (68")

At the heart of the CarCapsule is a 12-volt, high-pressure fan that provides continuous airflow to keep your vehicle or motorcycle dry. Temperature inside the bubble remains constant and consistent with outside air. The evaporative storage system keep your car or other classic dry because the air changes inside the bubble 3 to 4 times every hour. This prevents any moisture from condensing on your vehicle or motorcycle. Order one for your classic car today!

PART# GIF-701
1967 - 2017 CarCapsule Clear Bubble System
CarCapsule Clear Bubble Car Cover Protection System, 16 Foot
Our Price: $439.95

CarCapsule Clear Bubble Car Cover Protection System, 16 Foot

Your classic car is timeless and it deserves world class protection. This 16' Capsule is perfect for your classic car. You’ll find the CarCapsule car bubble system is a great way to keep your classic car protected. far exceeds the “old school” multi-layer car cover in terms of protection. The Car-Capsule is EASY as 1, 2, 3 to use! You won't believe it and that's just an added bonus when you see how well your car is locked away from the elements like corrosion, rust, dust, dirt, dings and even finger prints. The indoor capsule is a clear vinyl bubble that completely seals and protects your car from the elements that we all fear. It will leave you with the assurance that your investment is well protected. The indoor vinyl "bubble" is a 10 mil. anti-static, double-polished, radio frequency welded, 100 per cent PVC dream come true. It's so strong that you could accidentally drop a 5 pound hammer on it and it will bounce right off! The zipper is heavy duty 100 per cent nylon and will not scratch your vehicle. The material is 18 ounce Herculite and is impervious to oil, gas and antifreeze. It is also abrasion-resistant, mildew resistant and will not support a flame. There are so many remarkable things about the CarCapsule that we can safely say that there is nothing like it on the market.

This 16 foot bubble measures: Length = 16' (192") Width = 6'-6" (78") Height = 5'-8" (68")

At the heart of the CarCapsule is a 12-volt, high-pressure fan that provides continuous airflow to keep your vehicle or motorcycle dry. Temperature inside the bubble remains constant and consistent with outside air. The evaporative storage system keep your car or other classic dry because the air changes inside the bubble 3 to 4 times every hour. This prevents any moisture from condensing on your vehicle or motorcycle. Order one for your classic car today!

PART# GIF-700
1978 Monte Carlo Landau Coupe Dealership Showroom Sign Poster Print, GM Original
1978 Monte Carlo Landau Coupe Dealership Showroom Sign Poster Print, GM Original
Our Price: $300.00

1978 Monte Carlo Landau Coupe Dealership Showroom Sign Poster Print

Super rare GM dealership poster for the 78 Monte Carlo Landau Coupe. Great condition to be 40 years old. Measures 18" x 32". Not a thin paper poster, this is on 1/8" hardboard. This beauty does have some very minor shelf wear. Will look super cool once mounted. This sign would have hung in your local GM dealership to promote the freshest models. A real vintage piece of GM history!

PART NUMBER: GIF-201
1965 Chevelle Malibu Super Sport Dealership Showroom Sign Poster Print, GM Original
1965 Chevelle Malibu Super Sport Dealership Showroom Sign Poster Print, GM Original
Our Price: $300.00

1965 Chevelle Malibu Super Sport Dealership Showroom Sign Poster Print

Super rare GM dealership poster sign for the 65 Chevelle Malibu SS. Great condition to be over 53 years old. Measures 18" x 32". Not a thin paper poster, this is on 1/8" hardboard. This one has some very light shelf wear. Will look super cool once framed. This sign would have hung in your local GM dealership to promote the freshest models. Go back in time with this vintage piece of GM history!

PART NUMBER: GIF-227
Ask For Wolf's Head Oil - Metal Tin Sign - Heavy - 30 " X 23 "
Sign, Metal Tin, Ask For Wolf's Head Oil, Heavy, 30 " X 23 "
Our Price: $169.95

Super cool Wolfs Head motor oil metal tin sign for the Muscle Car enthusiast. This sign is heavy, weighs 11.5 pounds. 1/16 of an inch thick. Oval in shape and measures 30 inches tall and 23 inches wide. Looks great anywhere, perfect for any room! Excellent quality, made in the USA!

PART NUMBER: GIF-211C
1964 - 1972 Chevelle Car Cover, Grey
1964 - 1972 Chevelle Car Cover, Grey
Our Price: $149.95

1964 - 1972 Chevelle Car Cover, Grey

New premium quality indoor car cover for your Chevelle. Non-abrasive and built to last. Correct fit for all 64 - 72 models, coupe or convertible. With the extra bulk this cover helps to guard against minor nicks and dings. Order yours today. Made in the USA!

PART NUMBER: GIF-4101
1964 - 1972 Chevelle Onyx Stretch Fit Car Cover, Indoor Soft Lining
1964 - 1972 Chevelle Onyx Stretch Fit Car Cover, Indoor Soft Lining
Our Price: $154.95
Sale Price: $139.95
You save $15.00!

1964 - 1972 Chevelle Onyx Stretch Fit Car Cover, Indoor Soft Lining

NEW Black Stretch Fit 1964 - 1972 Chevelle Form Fitting Wrinkle Free Onyx Car Cover with a super soft lining. Made of a polyester blend that includes Lycra & Spandex, it creates the perfect combination of a Satin like exterior feel with a luxuriously soft underside to pamper your 1964 - 1972 Chevelle's finish. The Onyx is moisture-repellent, yet breathable. Non-abrasive and built to last. Correct for all 1964 - 1972 models. Wrap the Onyx indoor car cover around your 64, 65, 66, 67, 68, 69, 70, 71, or 72, Chevelle and keep it safe from dirt and debris of all types. Each Onyx Indoor Car Cover includes a matching storage bag, made from the same material as the cover. Order yours today.

"Customers really like the fact you can tell what is under the cover."

NOTE: The front and rear hems, mirror pockets and specific patterns are tailored to your Chevelle. Its stretchability results in a sleek, form-fitting look that is easy to slip on. Each Onyx Indoor Car Cover includes a storage bag. 3 Year Warranty Included!

Premium Quality at a Affordable Price!

Part Number: GIF-4103
Vintage Chevrolet Beverage Cooler with Bottle Opener Choice from RED or BLUE, with White Colored Details
Vintage Chevrolet Beverage Cooler with Bottle Opener, Choice of RED or BLUE, with White Colored Details, Sold Individually
Our Price: $124.95
Sale Price: $109.00
You save $15.95!

NEW Vintage Chevrolet Beverage Cooler with Bottle Opener. Choose from a RED or BLUE Powder Coated Finish. Features White Colored Bowtie and "Genuine Chevrolet" Text!. Stand out at the next Car Show or Cruise!! This is a GM Licensed Product. This Cooler features a White Bowtie Logo and Script, you must choose either Red or Blue. Ice Chest Cooler also features inner stainless steel tray and exterior bottle opener. This Cooler makes the perfect gift for any Chevy enthusiast.

~~Choose either RED or Blue, coolers are sold individually.

PART NUMBER: GIF-940
1964 - 1972 Chevelle MaxTech 4 Layer Car Cover, Indoor / Outdoor
1964 - 1972 Chevelle MaxTech 4 Layer Car Cover, Indoor / Outdoor
Our Price: $109.95
Sale Price: $99.95
You save $10.00!

1964 - 1972 Chevelle MaxTech 4 Layer Car Cover, Indoor / Outdoor

Premium quality 4 layer weatherproof car cover for your 1964 - 1972 Chevelle. Non-abrasive and built to last. Correct for all 1964 - 1972 models. Wrap the MaxTech indoor / outdoor car cover around your 64, 65, 66, 67, 70, 71, 72 or 72 Chevelle and keep it safe from rain, snow, ice, dirt and debris of all types. The 4 layers also adds protection against dings and dents. This four layer cover blocks out moisture, dirt, and pollutants while letting air pass through. All Max Tech indoor/outdoor car covers feature front & rear elastic so it stays put in all weather conditions, custom fit mirror pockets, non-scratch tie down grommets, and an attractive grey finish. Order yours today.

NOTE: The cover is weatherproof and water resistant but not waterproof. This 4 layer design is breathable meaning it allows water to evaporate instead of being trapped against the paint.

Premium Quality at a Affordable Price!

Part Number: GIF-4102
Compass, GM Dealer Accessory
Compass, GM Dealer Accessory
Our Price: $49.95

Add a cool looking GM dealer accessory compass to your Chevelle, Nova or any other GM classic. This compass was a GM accessory part # 983335 that could have been added to any GM car at a dealership or later. Includes mounting hardware and instructions, even includes a neat retro GM box. Forget the GPS just add a compass to your dash and always know the direction your heading. Order yours today!




PART NUMBER: DAS-1060
COPO CAMARO, CHEVELLE & NOVA: CHEVROLET'S ULTIMATE MUSCLE CARS, By Matt Aver
LIT-170
Our Price: $44.95
Sale Price: $39.95
You save $5.00!

COPO CAMARO, CHEVELLE & NOVA: CHEVROLET'S ULTIMATE MUSCLE CARS, By Matt Avery

The COPO Camaros, Chevelles, and Novas of the 1960s and early 1970s were the ultimate high-performance GM muscle cars. While few knew about this back channel program at the time, it is now recognized as the origin of GM's top muscle cars. Dedicated Chevy racers and car owners were determined to compete head-to-head with Mopar and Ford at the racetrack and on the street. But in order to do so, they needed to circumvent the corporate ban on racing and resolve the restriction of 400-ci engines in intermediate vehicles.

Don Yenko and some other creative individuals recognized the loophole in the COPO (Central Office Production Order) system at General Motors. The COPO program was designated for fleet vehicles such as taxicabs, but at the peak of the muscle car wars it was used to build the ultimate high-performance Chevy muscle cars. Some horrific on-track accidents compelled General Motors to drop out of racing, yet GM did not want to allow Chrysler and Ford to steal the glory on Sundays while they stood on the sidelines. As a result, GM inconspicuously ran the Chevy racing and high-performance program through back channels, and COPO was integral part of the program. Don Yenko became the COPO muscle car program chief architect and champion. He ordered the Corvair through the COPO program and created the Corvair Stinger to mount a SCCA road race campaign. From these humble beginnings, the road map for creating the ultimate Camaros, Chevelles, and Novas was established. Factory Camaro V-8s came equipped with the 350 small-block or 396 big-block, which had to compete with the Mustang Cobra Jets and Mopar Wedge and Hemi cars. In response, building the big-block Camaro through the COPO program was devised. At the factory, Camaros were fitted with the 396 engines and shipped to dealers where the 427s were installed in the cars. From 1967 to 1969, the factory and dealers installed eight different 427 engines, including the all aluminum ZL1 427.

Later on, others used the road map to build COPO Novas and Chevelles to similar spec, with similar results. The COPO performance car program did not end with these muscle cars. Yenko even ordered several hundred Vegas through the COPO program, so they could be fitted with turbochargers and raced in SCCA competition.

Chevy muscle car aficionado and author Matt Avery retraces the history of the COPO program and the creation of these premier muscle cars. He has scoured archives and tracked down owners and personnel involved in the program to deliver a comprehensive story and complete guide to the COPO cars. The COPO muscle car and racing program produced a storied and remarkable journey, and author Matt Avery captures all these facets in this entertaining and revealing history.

Perfect for any GM / Chevy / Camaro enthusiast!

Part Number: LIT-170
Rear License Plate Frame with Back Up LED Lights
Rear License Plate Frame with Back Up LED Lights
Our Price: $39.95

This license plate frame has 14 super bright LED lights built in for use of back up lights. If you like having all red tail lights but still want back-up lights, this is for you. Chrome plated plastic frame will look great on any Chevelle or Nova, order yours today!!

*License plate not included

PART NUMBER: LIC-36
New Compact Rolling Engine Stand
New Compact Rolling Engine Stand
Our Price: $34.95

New Compact Rolling Engine Stand

New super handy rolling engine stand. Works great for all Chevelle and Nova small block or big block chevy engines. Includes 4 wheels for easy storage.

PART NUMBER: ENC-322
Fender Cover, All Black USA
Fender Cover, All Black USA
Our Price: $24.95

All black fender cover for Chevelle and Nova. Premium quality material with super soft backing to protect your paint. Equipped with pocket for tools, paper work, etc..

PART NUMBER: GIF-239
Fender Cover with Clear Pouch Pockets
Fender Cover with Clear Pouch Pockets
Our Price: $24.95

Fender cover with clear pouch pockets for all models. Unique pouches hold tools or paper work. Held in place with straps and velcro fasteners.

PART NUMBER: GIF-238
Hurst Logo Fender Gripper Cover Mat
Hurst Logo Fender Gripper Cover Mat
Our Price: $24.95
Sale Price: $23.95
You save $1.00!

Hurst Logo Fender Gripper Cover Mat is now on SALE!

The Hurst Logo fender gripper mat cover is a non-slip soft cushion product. Protect your investment with an Original Fender Gripper. They offer the highest degree of protection from impact and scratches while you work on your car. Each Fender Gripper is made from a unique reinforced foam padding that provides superior grip to keep it in place and prevents tools form sliding off even at extreme angles. This material is resistant to most petroleum based chemicals like motor oil as well as carb cleaner, brake fluid and anti-freeze. There are also 100% washable.

Dimensions: 22” x 34”. Sold individually.

This is a must have for any Hurst enthusiast, restorer or weekend mechanic.

Part Number: GIF-233H
Super Sport Script Logo, Fender Gripper Cover Mat is now on SALE!
Super Sport Script Logo, Fender Gripper Cover Mat
Our Price: $24.95
Sale Price: $23.95
You save $1.00!

Super Sport Script Logo, Fender Gripper Cover Mat is now on SALE!

The Super Sport Script Logo fender gripper mat cover is a non-slip soft cushion product. Protect your investment with an Original Fender Gripper. They offer the highest degree of protection from impact and scratches while you work on your car. Each Fender Gripper is made from a unique reinforced foam padding that provides superior grip to keep it in place and prevents tools form sliding off even at extreme angles. This material is resistant to most petroleum based chemicals like motor oil as well as carb cleaner, brake fluid and anti-freeze. There are also 100% washable.

Dimensions: 22” x 34”. Sold individually.

This is a must have for any GM enthusiast, restorer or weekend mechanic.

PART NUMBER: GIF-4001
Chevelle Script Logo, Fender Gripper Cover Mat is now on SALE!
Chevelle Script Logo, Fender Gripper Cover Mat
Our Price: $24.95
Sale Price: $23.95
You save $1.00!

Chevelle Script Logo, Fender Gripper Cover Mat is now on SALE!

The Chevelle Script Logo fender gripper mat cover is a non-slip soft cushion product. Protect your investment with an Original Fender Gripper. They offer the highest degree of protection from impact and scratches while you work on your car. Each Fender Gripper is made from a unique reinforced foam padding that provides superior grip to keep it in place and prevents tools form sliding off even at extreme angles. This material is resistant to most petroleum based chemicals like motor oil as well as carb cleaner, brake fluid and anti-freeze. There are also 100% washable.

Dimensions: 22” x 34”. Sold individually.

This is a must have for any GM enthusiast, restorer or weekend mechanic.

PART NUMBER: GIF-4000
SS Logo, Fender Gripper Cover Mat is now on SALE!
Fender Cover, SS Logo
Our Price: $24.95
Sale Price: $23.95
You save $1.00!

SS Logo, Fender Gripper Cover Mat is now on SALE!

The SS Logo Logo fender gripper mat cover is a non-slip soft cushion product. Protect your investment with an Original Fender Gripper. They offer the highest degree of protection from impact and scratches while you work on your car. Each Fender Gripper is made from a unique reinforced foam padding that provides superior grip to keep it in place and prevents tools form sliding off even at extreme angles. This material is resistant to most petroleum based chemicals like motor oil as well as carb cleaner, brake fluid and anti-freeze. There are also 100% washable.

Dimensions: 22” x 34”. Sold individually.

This is a must have for any GM enthusiast, restorer or weekend mechanic.

PART NUMBER: GIF-233E
Heartbeat Of America, Fender Gripper Cover Mat is now on SALE!
Heartbeat Of America, Fender Gripper Cover Mat
Our Price: $24.95
Sale Price: $23.95
You save $1.00!

Heartbeat Of America, Fender Gripper Cover Mat is now on SALE!

The Heartbeat Of America Logo fender gripper mat cover is a non-slip soft cushion product. Protect your investment with an Original Fender Gripper. They offer the highest degree of protection from impact and scratches while you work on your car. Each Fender Gripper is made from a unique reinforced foam padding that provides superior grip to keep it in place and prevents tools form sliding off even at extreme angles. This material is resistant to most petroleum based chemicals like motor oil as well as carb cleaner, brake fluid and anti-freeze. There are also 100% washable.

Dimensions: 22” x 34”. Sold individually.

This is a must have for any GM enthusiast, restorer or weekend mechanic.

PART NUMBER: GIF-233C
Chevrolet, Bow Tie, Fender Gripper Cover Mat is now on SALE!
Chevrolet, Bow Tie, Fender Gripper Cover Mat
Our Price: $24.95
Sale Price: $23.95
You save $1.00!

Chevrolet, Bow Tie, Fender Gripper Cover Mat is now on SALE!

The Chevrolet Bow Tie Logo fender gripper mat cover is a non-slip soft cushion product. Protect your investment with an Original Fender Gripper. They offer the highest degree of protection from impact and scratches while you work on your car. Each Fender Gripper is made from a unique reinforced foam padding that provides superior grip to keep it in place and prevents tools form sliding off even at extreme angles. This material is resistant to most petroleum based chemicals like motor oil as well as carb cleaner, brake fluid and anti-freeze. There are also 100% washable.

Dimensions: 22” x 34”. Sold individually.

This is a must have for any GM enthusiast, restorer or weekend mechanic.

PART NUMBER: GIF-233A
General Motors GM Logo Fender Gripper Cover Mat
General Motors GM Logo Fender Gripper Cover Mat
Our Price: $24.95
Sale Price: $23.95
You save $1.00!

General Motors GM Logo Fender Gripper Cover Mat is now on SALE!

The General Motors GM Logo fender gripper mat cover is a non-slip soft cushion product. Protect your investment with an Original Fender Gripper. They offer the highest degree of protection from impact and scratches while you work on your car. Each Fender Gripper is made from a unique reinforced foam padding that provides superior grip to keep it in place and prevents tools form sliding off even at extreme angles. This material is resistant to most petroleum based chemicals like motor oil as well as carb cleaner, brake fluid and anti-freeze. There are also 100% washable.

Dimensions: 22” x 34”. Sold individually.

This is a must have for any GM enthusiast, restorer or weekend mechanic.

Part Number: GIF-233F
Genuine Chevrolet, Bow Tie, Fender Gripper Cover Mat is now on SALE!
Genuine Chevrolet, Bow Tie, Fender Gripper Cover Mat
Our Price: $24.95
Sale Price: $23.95
You save $1.00!

Genuine Chevrolet, Bow Tie, Fender Gripper Cover Mat is now on SALE!

The Genuine Chevrolet Logo fender gripper mat cover is a non-slip soft cushion product. Protect your investment with an Original Fender Gripper. They offer the highest degree of protection from impact and scratches while you work on your car. Each Fender Gripper is made from a unique reinforced foam padding that provides superior grip to keep it in place and prevents tools form sliding off even at extreme angles. This material is resistant to most petroleum based chemicals like motor oil as well as carb cleaner, brake fluid and anti-freeze. There are also 100% washable.

Dimensions: 22” x 34”. Sold individually.

This is a must have for any GM enthusiast, restorer or weekend mechanic.

PART NUMBER: GIF-233B
Red Bowtie Anti Theft Wheel Valve Stem Caps With Keychain
Red Bowtie Anti Theft Wheel Valve Stem Caps With Keychain
Our Price: $22.95

A gift set of four air valve caps and a matching keychain. Add a personal punch to your gorgeous wheels. They are built around a solid brass core and finished with a brilliant logo that can be seen. Made in the USA! Anti-theft style requires use of keychain to remove. Keep sticky fingers off your valve stem caps with this gift set. Order yours today!!

Part Number: WHE-355T
Gold Bowtie Anti Theft Wheel Valve Stem Caps With Keychain
Gold Bowtie Anti Theft Wheel Valve Stem Caps With Keychain
Our Price: $22.95

A gift set of four air valve caps and a matching keychain. Add a personal punch to your gorgeous wheels. They are built around a solid brass core and finished with a brilliant logo that can be seen. Made in the USA! Anti-theft style requires use of keychain to remove. Keep sticky fingers off your valve stem caps with this gift set. Order yours today!!

Part Number: WHE-354T
Billet Specialties Slimline License Plate Frame, Polished or Satin Black Finish
Billet Specialties Slimline License Plate Frame, Polished or Satin Black Finish
Our Price: $24.95
Sale Price: $21.95
You save $3.00!

Billet Specialties Slim Line license plate frames match the outside dimensions of standard license plates and fit well in tight spaces, including GM front license plate mounts. Stainless hardware included. This frame is not recessed. Choose Polished or Satin Black Finish.

PART NUMBER: GIF-366

FAST AND FURIOUS DOM'S 1970 CHEVROLET CHEVELLE SS 1/24 MODEL PRIMER GREY
FAST & FURIOUS DOM'S 1970 CHEVROLET CHEVELLE SS PRIMER GRAY 1/24 MODEL
Our Price: $24.95
Sale Price: $19.95
You save $5.00!

PART NUMBER: GIF-828
FAST AND FURIOUS DOM'S 1970 CHEVROLET CHEVELLE SS 1/24 RED
FAST & FURIOUS DOM'S 1970 CHEVROLET CHEVELLE SS 1/24 RED MODEL
Our Price: $24.95
Sale Price: $19.95
You save $5.00!

PART NUMBER: GIF-827
Car Cover, Plastic Disposable
Car Cover, Plastic Disposable
Our Price: $19.95

This plastic disposable car cover is perfect to cover you car while at shows during a quick rain shower or to keep dust off you car while in the garage. Simply towel dry the cover, air dry and reuse. This cover is small enough to fit into your car care bag and large enough to cover all Chevelle and Nova models. This is a great way to have a water proof cover for you more expensive car cover.

PART NUMBER: GIF-695
Valve Stem Caps & Key Chain Kits, Red Bowtie
Valve Stem Caps & Key Chain Kits, Red Bowtie
Our Price: $18.95

Cool custom valve stem caps with keychain tool. Caps have a built in O-ring for airtight seal. Poished chrome keychain doubles as a tool to tighten caps. show car ready! with red bow tie

PART NUMBER: WHE-94
Valve cap key chain tool set Black with Gold bowtie
Valve cap key chain tool set Black with Gold bowtie
Our Price: $18.95

Valve cap key chain tool set Black with Gold bowtie.

PART NUMBER: WHE-93B
Valve Stem cap & Keychain Kits
Valve Stem cap & Keychain Kits
Our Price: $18.95

Cool custom valve stem caps with keychain tool. Caps have a built in O-ring for airtight seal. Polished chrome keychain doubles as a tool to tighten caps. show car ready! Silver bow tie.

PART NUMBER: WHE-93
Red Bowtie Wheel Valve Stem Caps With Keychain
Red Bowtie Wheel Valve Stem Caps With Keychain
Our Price: $18.95

A gift set of four air valve caps and a matching keychain. add a personal punch to your gorgeous wheels. They are built around a solid brass core and finished with a brilliant logo that can be seen. Made in the USA!

Part Number: WHE-355
Gold Bowtie Wheel Valve Stem Caps With Keychain
Gold Bowtie Wheel Valve Stem Caps With Keychain
Our Price: $18.95

A gift set of four air valve caps and a matching keychain. Add a personal punch to your gorgeous wheels. They are built around a solid brass core and finished with a brilliant logo that can be seen. Made in the USA!

Part Number: WHE-354
Bluegrass Dragway Racers Reunion 2010 DVD
Bluegrass Dragway Racers Reunion 2010 DVD
Our Price: $14.95

The Bluegrass Dragway was located on US-27 just 5 miles South of Lexington, KY. It opened in 1964 and closed in 1981. This DVD captures photos and live race footage from 64-81. It commemorates the Bluegrass Dragway, the racers, the cars, and the history as it depicts the first ever Racers Reunion since the track's closing. 2 hours in length. An awesome piece of drag race history.

PART NUMBER: GIF-450
Gasket Scraper w/ Non-Marring & Razor Blades
Gasket Scraper w/ Non-Marring & Razor Blades
Our Price: $14.95
Sale Price: $12.95
You save $2.00!

Gasket Scraper w/ Non-Marring & Razor Blades

The perfect tool for removing stubborn gasket residue using the non-marring plastic blades. Perfect for removing old valve cover gaskets, rear end gaskets, head gaskets...ect. This heavy duty tool features a carbon steel body with a comfortable plastic & rubber grip handle. The razor blades also work well for removing labels, stickers and decals from glass. Accepts standard single edge razor blades.

Includes:
Gasket Scraper
(10) Non-Marring Double-Edge Plastic Blades
(10) Single-Edge Razor Blades


PART NUMBER: ENC-1103
Bluegrass Dragway Drag Strip Racers Reunion 2012 DVD - Vintage Movie Footage
Bluegrass Dragway Drag Strip Racers Reunion 2012 DVD - Vintage Movie Footage
Our Price: $12.95

The Bluegrass Dragway was located on US-27 just 5 miles South of Lexington, KY. It opened in 1964 and closed in 1981. This DVD captures live race footage from 64-81. It commemorates the Bluegrass Dragway, the racers, the cars, and the history as it depicts the first ever Racers Reunion since the track's closing. One hour and fourty minutes in length. An awesome piece of drag race history.

PART NUMBER: GIF-453