 |
1964 - 1972 Chevelle Next Gen Lightweight G-Force Transmission Crossmember for TH350, Muncie, Powerglide, T-10, Super-T-10, Saginaw, TH200, TH250, 700R4, 4L60, 4L60E, GM T-5, TREMEC, TKO-500, and TKO-600
Newly designed and manufactured by GForce Performance. The same quality of our original crossmember, designed and manufactured to be lighter for performance. Fits the following transmissions (depending on the model year-see addition notes below) TH350, Muncie, Powerglide, T-10, 700R4, 4L60, 4L60E, TH400, 2004R, Super T-10, Saginaw, TH200, TH250, GM-T5, TREMEC TKO 5 speeds. Crossmember is Black-Satin Powder Coated for a durable finish, and includes new Grade #8 mounting hardware.
Note: Transmission Mount is purchased separately, and we recommend a Polyurethane Transmission Mount, such as our Polyurethane part # TRA-724.
Lighter Weight with Same Strength, Durability, and Reliability.
At G Force, refining our products does not stop at fitment. We set high standards to ensure that the Crossmembers Next Gen will withstand the demanding service you experience on the road or racecourse.
Proven StrengthTested under the harshest conditions by experienced racers, our legacy Crossmembers have stood the test of time. Even though we re-engineered our most popular Crossmembers to weigh up to 50% less, they meet the same stringent standards. Additionally, the lighter weight makes our newest Crossmembers a practical choice for a broader range of projects.
Each part is rigorously tested and engineered for fitment, strength, weight, and durability. You can buy with confidence from G Force.
G Force Performance Products, Performance Engineered from Start to Finish.
Our NEW high performance G Force Chevrolet coupe transmission crossmember gives you the room to run a true dual exhaust system. This transmission crossmembers has a double hump design, which gives you plenty of ground clearance!
- 1964 – 1967: Transmission types are TH350, Muncie, Powerglide, T-10, Super-T-10, Saginaw, TH200, TH250, 700R4, 4L60, 4L60E, GM T-5, TREMEC, TKO-500, and TKO-600.
1968 – 1972: Transmission types are TH350, Muncie, Powerglide, T-10, Super-T-10, Saginaw, TH200, TH250, 700R4, 4L60, 4L60E, GM T-5, TREMEC, TKO-500, TKO-600, 200R4, and TH400 (Short Tail-shaft). 1968-1972 , Hard-Tops Only * * No Convertibles & No El Caminos * *
Note: Distance between crossmember frame mounting holes is 53-5/8″ inches. Be sure to measure your frame FIRST ! Before you order, to insure proper selection.
TRA-4220 installation notes:
Crossmember is installed with transmission mounting tab positioned towards front of car, and exhaust double humps are on the top, next to floor pan. The supplied aluminum spacers are to provide custom height positioning of your transmission mount. (if you need them) They are positioned between the crossmember and your GM 3 hole transmission mount. Select desired amount of spacers needed and use longer bolts to insure full engagement into transmission mount. Some applications will not require any spacers.
Some vehicles of this generation are equipped with a crossmember that bolts directly to the vehicles frame rail, while others are equipped with crossmembers that utilize tabs that set on the frame rails, embedded with a rubber liner. Our #RCAE crossmember bolts directly to the frame rails to the factory frame holes. ( Do Not Use The Rubber Pads ! ) utilize the provided 7/16″ hardware and enlarge holes in your frame rails with a 1/2″ drill-bit. If you stay with the stock size 3/8″ hardware, it is strongly recommended to use new Grade 8 fasteners to compensate.
PART NUMBER: TRA-4220
|
|
|