Home > Chevelle Parts > Chevelle Transmission & Clutch
Sort By:
Page of 5
1968 - 1972 Chevelle Hurst Competition Plus Shifter Assembly
1968 - 1972 Chevelle Hurst Competition Plus Shifter Assembly
Our Price: $367.08

1968 - 1972 Chevelle Hurst Competition Plus Shifter Assembly

New Hurst Competition Plus shifter assembly for your Chevelle. Exact fit for all 68, 69, 70, 71 & 72 four speed models. Works great for all muncie and borg warner style transmissions. Rectangular design chrome shifter handle. Includes white knob with 4 speed pattern. Perfect for with or without console applications. The body on this new version will have front and rear stop adjust bolts. The industry standard for over 30 years, these Hurst Competition/Plus shifters offer state-of-the-art control for popular 4, 5, and 6-speed manual transmissions. Dedicated applications ensure a custom fit on a wide variety of vehicles with factory consoles without any floor pan modifications. Other features include race track proven design and reliability, adjustable gear stops to prevent overshifting and prolong transmission life, and an easy-to-follow installation guide.

Use with Linkage Kits Part# TRA-4551 for 68 models or Part# TRA-4552 for 69-72 models.

Fits with or without console

PART NUMBER: TRA-4553
1964 - 1967 Chevelle Hurst Four Speed Shifter Assembly, Competition Plus, Muncie
1964 - 1967 Chevelle Hurst Four Speed Shifter Assembly, Competition Plus, Muncie
Our Price: $358.13

1964 - 1967 Chevelle Hurst Four Speed Shifter Assembly, Competition Plus, Muncie

New complete shifter assembly for your Chevelle. Exact fit for Muncie 4 speed transmissions. This very popular Hurst Competition Plus shifter is designed for the 64, 65, 66, and 67 Chevelle models Chrome handle has the two lower bolts for easy on and off. Features a rectangular handle design with the Hurst name stamped in the side. Includes a white hurst shifter knob with the engraved 4-speed pattern. Official licensed Hurst product.

Fits for both with and without floor consoles.

PART NUMBER: TRA-4550
1966 - 1972 Clutch Bellhousing, 11 Inch Original GM Used 3899621
1966 - 1972 Clutch Bellhousing, 11 Inch Original GM Used 3899621
Our Price: $350.00

1966 - 1972 Chevelle or Nova Clutch Bellhousing, 11 Inch Original GM Used 3899621

Nice original GM larger 11 inch bellhousing. Exact fit for all cars with 11 inch diameter clutch discs. Correct fit for all four speed equipped. The one you will receive will be similar to the one pictured. May need cleaned or detailed. No cracks, stripped threads,or major damage. Original GM units stamped 3899621 are hard to find.

PART NUMBER: CLU-33
1968 - 1972 Chevelle Transmission Crossmember, Four Speed
1968 - 1972 Chevelle Transmission Crossmember, Four Speed
Our Price: $350.00

1968 - 1972 Chevelle Transmission Crossmember, Four Speed

Correct original GM used cross member for your Chevelle. Works great for all 68, 69, 70, 71, and 72 manual transmission four speed models. Features the proper raised box where your shifter brace mounts. If you want the real deal, here it is.

PART NUMBER: TRA-4025
1968 - 1970 Chevelle / Nova Muncie Transmission Case GM 3925660: M-20, M-21, M-22
1968 - 1970 Chevelle / Nova Muncie Transmission Case GM 3925660: M-20, M-21, M-22
Our Price: $299.00

You can now replace your damaged or broken M-20, M-21, or M-22 transmission case with this new OEM style factory case. This case has correct part number 3925660 with U.S. PATENT number 3088336 and GENERAL MOTORS CORP castings. Both fill and drain plugs are drilled and tapped. Lower cluster gear shaft pin diameter hole is one inch in diameter. Exact shape, size, and details. Stop trying to look for one with good threads and no broken ears,,, here it is!! This is a licensed GM restoration part.

PART NUMBER: TRA-610A

1968 - 1972 Chevelle CONVERTIBLE 4L60E & 4l85e Transmission Crossmember
1968 - 1972 Chevelle CONVERTIBLE 4L60E & 4l85e Transmission Crossmember
Our Price: $284.95

New transmission crossmember for your 1968 - 1972 CONVERTIBLE Chevelle. Fits the following transmissions: 4L60E & 4l85e. Finished in a black powder coat. Includes new mounting hardware.

Our NEW high performance G Force Chevrolet coupe transmission crossmember gives you the room to run a true dual exhaust system. This transmission crossmember has a double hump design, which gives you plenty of ground clearance!

Our A-body crossmember is a direct bolt on. Made from boxed tubing (1/8 in. thick) to handle the frame twisting power of your high performance small block, big block, or LS1, LS2, LS3, or LSX engine.

Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately part # TRA-724.

1968 - 1972 CONVERTIBLE (note: distance between crossmember frame holes is approximately 47-1/2". Measure your frame or crossmember to insure proper selection)

PART NUMBER: TRA-4205
New Chevy 3899621 Bellhousing Kit with Cover, Fork, Bearing, Boot and more, 11"
New Chevy 3899621 Bellhousing Kit with Cover, Fork, Bearing, Boot and more, 11"
Our Price: $289.95
Sale Price: $279.95
You save $10.00!

New Chevy 3899621 Bellhousing Kit with Cover, Fork, Bearing, Boot and more, 11"

The kit includes a Factory Reproduction GM 3899621 Style 11 inch Bellhousing, Flywheel Inspection Cover, Clutch Fork with Ball Retaining Spring, Throwout Bearing, Clutch Fork Boot, and Clutch Fork Pivot Ball.

This Cast Aluminum Bellhousing is a reproduction of the original 3899621 bellhousing used on GM models with Big Block & Small Block engines equipped with a 11" clutch & 168 tooth flywheel. This performance aluminum bellhousing has the GM Part # 3899621 casting number stamped on the outside of the bellhousing just like the original. If you are doing a restoration of an early muscle car, or just want the original 621 bellhousing to finish that rod project, this bellhousing is the perfect part!

Fits ALL Small Block & Big Block Chevrolet engines

Applications:
1964-1988 Chevy Chevelle, Malibu, Monte Carlo*
1959-1987 Chevy El Camino*
1959-1988 Chevy Impala, Caprice, Bel Air, Biscayne, Brookwood, Kingswood, Nomad, Sedan Delivery*
1963-1981 Chevy Corvette*
1967-1981 Chevy Camaro*
1968-1974 Chevy II, Nova*
*With Manual Transmissions & 168 tooth Flywheel

The bellhousing was used with 4 speed transmissions in 66-72 Chevelle, 66-81 Corvette, 67-72 Camaro, 68-72 Nova, & 64-81 Impala, but with any GM transmission that measures 4.675" and an 11" clutch, it will fit great in all of the additional applications shown above, as well as many different types of projects. This will make it a snap to get that big GM bellhousing in your muscle car or rod project. This new Chevy high performance 11" style aluminum bellhousing was issued on Camaros, Chevelles, Impalas, Corvettes & Nova’s with big block 396, 427, & 454 engines, as well as Yenko, Copo, & ZL1 and also small blocks like 302, 327, 350 & 400 with the 168 tooth, 14" flywheels and 11" clutches, including Z28, Yenko, & Deuce models. Will accept your original Muncie or Saginaw Manual Transmission with a 4.675" O.D. bearing retainer. Will even work with the Tremec 5 & 6 Speed Transmissions. You can use one of the new bolt-in Classic Car Conversion Transmissions and still use all of the Stock 4 Speed Pedals and Rods with this bellhousing.

PART NUMBER: CLU-621K
1970 - 1974 Chevelle / Nova Muncie Transmission Case GM 3925661: M-20, M-21, M-22
1970 - 1974 Chevelle / Nova Muncie Transmission Case GM 3925661: M-20, M-21, M-22
Our Price: $299.00
Sale Price: $279.00
You save $20.00!

You can now replace your damaged or broken M-20, M-21, or M-22 transmission case with this new OEM style factory case. This case has correct part number 3925661 with U.S. PATENT number 3088336 and GENERAL MOTORS CORP castings. Both fill and drain plugs are drilled and tapped. Lower cluster gear shaft pin diameter hole is one inch in diameter. Exact shape, size, and details. Stop trying to look for one with good threads and no broken ears,,, here it is!! This is a licensed GM restoration part.

PART NUMBER: TRA-610B
New Chevy 3858403 Bellhousing Kit with Cover, Fork, Bearing, Boot and more, 10.5"
New Chevy 3858403 Bellhousing Kit with Cover, Fork, Bearing, Boot and more, 10.5"
Our Price: $289.95
Sale Price: $269.95
You save $20.00!

New Chevy 3858403 Bellhousing Kit with Cover, Fork, Bearing, Boot and more, 10.5"

The kit includes a Factory Reproduction GM 3858403 Stamped Bellhousing, Flywheel Inspection Cover, Clutch Fork with Ball Retaining Spring, Throwout Bearing, Clutch Fork Boot, and Clutch Fork Pivot Ball.

This Cast Aluminum Bellhousing is a reproduction of the original 3858403 bellhousing used on GM models with Big Block & Small Block engines equipped with a 10 1/2" clutch & 153 tooth flywheel. This performance aluminum bellhousing has the GM Part # 3858403 casting number stamped on the outside of the bellhousing just like the original. If you are doing a restoration of an early muscle car, or just want the original 403 bellhousing to finish that rod project, this bellhousing is the perfect part!

Fits ALL Small Block & Big Block Chevrolet engines

Applications:
1964-1973 Biscayne, & Bel Air*
1964-1981 Camaro*
1966-1979 Caprice*
1963-1969 Corvette*
1968-1974 Chevy II & Nova*
1976-1977 Malibu*
1965-1969 Chevelle*
1964-1979 Impala*
With Manual Transmissions, & 153 Tooth Flywheel*

The bellhousing was used with 4 speed transmissions in 64-81 Camaro, 63-69 Corvette, 68-75 Chevy II & Nova, 76-77 Malibu, 65-69 Chevelle, 64-79 Impala, 66-79 Caprice, 64-72 Biscayne, & 64-73 Bel Air, but will work in any GM transmission that the front bearing measures 4.675" and uses a 10 1/2" clutch. It will fit great in all of the additional applications shown above, as well as many different types of projects. This will make it a snap to get that 10 1/2" GM bellhousing in your muscle car or rod project. This new Chevy high performance 10 1/2" style aluminum bellhousing was issued on Camaros, Chevelles, Impalas, Corvettes & Nova’s with big block 396, 427, also small blocks like 230, 250, 283, 302, 327, & 350 with the 153 tooth, 12 3/4" flywheels and 10 1/2" clutches. Will accept your original Muncie, Saginaw, & T-10 Manual Transmission with a 4.675" O.D. bearing retainer. You can use one of the new bolt-in Classic Car Conversion Transmissions and still use all of the Stock 4 Speed Pedals and Rods with this bellhousing.

PART NUMBER: CLU-403K
1968 - 1972 Chevelle CONVERTIBLE TH350, Muncie, Powerglide, T-10, 700R4, 4L60, 4L60E, TH400, 2004R, super T-10, Saginaw, TH200 Transmission Crossmember
1968 - 1972 Chevelle CONVERTIBLE TH350, Muncie, Powerglide, T-10, 700R4, 4L60, 4L60E, TH400, 2004R, super T-10, Saginaw, TH200 Transmission Crossmember
Our Price: $269.95

New transmission crossmember for your 1968 - 1972 CONVERTIBLE Chevelle. Fits the following transmissions: TH350, Muncie, Powerglide, T-10, 700R4, 4L60, 4L60E, TH400, 2004R, super T-10, Saginaw, TH200. Finished in a black powder coat. Includes new mounting hardware.

Our NEW high performance G Force Chevrolet coupe transmission crossmember gives you the room to run a true dual exhaust system. This transmission crossmember has a double hump design, which gives you plenty of ground clearance!

Our A-body crossmember is a direct bolt on. Made from boxed tubing (1/8 in. thick) to handle the frame twisting power of your high performance small block, big block, or LS1, LS2, LS3, or LSX engine.

Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately part # TRA-724.

1968 - 1972 CONVERTIBLE (note: distance between crossmember frame holes is approximately 43-1/4″. Measure your frame or crossmember to insure proper selection)

PART NUMBER: TRA-4204
1964 - 1967 TH350, Muncie, Powerglide, T-10, 700R4, 4L60, 4L60E, super T-10, Saginaw, TH200 Convertible Transmission Crossmember
1964 - 1967 Chevelle CONVERTIBLE TH350, Muncie, Powerglide, T-10, 700R4, 4L60, 4L60E, super T-10, Saginaw, TH200 Transmission Crossmember
Our Price: $269.95

New transmission crossmember for your 1964 - 1967 CONVERTIBLE Chevelle. Fits the following transmissions: TH350, Muncie, Powerglide, T-10, 700R4, 4L60, 4L60E, super T-10, Saginaw, TH200. Finished in a black powder coat. Includes new mounting hardware.

Our NEW high performance G Force Chevrolet coupe transmission crossmember gives you the room to run a true dual exhaust system. This transmission crossmember has a double hump design, which gives you plenty of ground clearance!

Our A-body crossmember is a direct bolt on. Made from boxed tubing (1/8 in. thick) to handle the frame twisting power of your high performance small block, big block, or LS1, LS2, LS3, or LSX engine.

Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately part # TRA-724.

1964 - 1967 convertible (note: distance between crossmember frame holes is approximately 43-1/4″. Measure your frame or crossmember to insure proper selection)

PART NUMBER: TRA-4202
1964 - 1967 & 1968 - 1972 TH350, Muncie, Powerglide, T-10, Super-T-10, Saginaw, 700R4 and more, Hardtop Transmission Crossmember
1964 - 1972 Chevelle HARDTOP TH350, Muncie, Powerglide, T-10, Super-T-10, Saginaw, 700R4 and more, Transmission Crossmember
Our Price: $269.95

New transmission crossmember for your 64 - 72 HARDTOP Chevelle. Fits the following transmissions: 1964 - 1967 transmission types: TH350, Muncie, Powerglide, T-10, Super-T-10, Saginaw, TH200, 700R4, 4L60, 4L60E, TKO-500, TKO-600.

1968 - 1972 HARDTOP transmission types: TH350, Muncie, Powerglide, T-10, Super-T-10, Saginaw, TH200, 700R4, 4L60, 4L60E, TKO-500, TKO-600, 200R4, TH400 short tail

Our NEW high performance G Force Chevrolet coupe transmission crossmember gives you the room to run a true dual exhaust system. This transmission crossmember has a double hump design, which gives you plenty of ground clearance!

Our A-body crossmember is a direct bolt on. Made from boxed tubing (1/8 in. thick) to handle the frame twisting power of your high performance small block, big block, or LS1, LS2, LS3, or LSX engine.

Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately part # TRA-724.

1968-1972, hardtops (note: distance between crossmember frame holes is approximately 53-5/8″. Measure your frame or crossmember to insure proper selection)

PART NUMBER: TRA-4201
1967 Chevelle Master Clutch Linkage Kit
1967 Chevelle Master Clutch Linkage Kit
Our Price: $259.95

Complete with everything you need including pedal and clutch fork for 67 Chevelle. Excellent quality! Kit includes: clutch and brake pedal, clutch and brake pedal pads, pedal bushings, upper clutch rod, clutch rod boot, z bar, z bar rebuild set, z bar bracket, lower adjusting rod, return spring, clutch fork and fork boot.

*Please choose Big Block or Small Block*

PART NUMBER: CLU-4024
1964 - 1966 Chevelle Master Clutch Linkage Kit
1964 - 1966 Chevelle Master Clutch Linkage Kit
Our Price: $259.95

1964 - 1966 Chevelle Master Clutch Linkage Kit

Complete with everything you need including pedal and clutch fork for 64 - 66 Chevelle. Excellent quality!

Kit includes:
clutch and brake pedal
clutch and brake pedal pads
pedal bushings
upper clutch rod
clutch rod boot
z bar
z bar rebuild kit
z bar bracket
lower adjusting rod
return spring
clutch fork
fork boot


*Please choose Big Block or Small Block*


PART NUMBER: CLU-4023
1971 - 1972 Chevelle Master Clutch Linkage Kit
1971 - 1972 Chevelle Master Clutch Linkage Kit
Our Price: $259.95

Complete with everything you need including pedal and clutch fork for 71 - 72 Chevelle. Excellent quality! Kit includes: upper push rod, upper rod boot, 3 Rod clips, frame side bracket, block side stud with seal, 2 Bellcrank felts (only one required), lower adjustable rod, return spring, return spring bracket, clutch fork to bellhousing rubber boot, bellcrank assembly with installed pivot kit, frame side ball stud with nut and washer and grease zerk fitting clutch and brake pedal assembly, 2 pedal pads and the clutch fork.


*Fits Small Block & Big Block engines.


PART NUMBER: CLU-4022
1967 - 1972 Automatic Transmission Kick Down Switch Assembly, Used GM
1967 - 1972 Automatic Transmission Kick Down Switch Assembly, Used GM
Our Price: $250.00

Correct Turbo 400 automatic transmission kick down switch assembly for your 1967 - 1972 Chevelle or Nova. Exact fit for all models with a TH-400 trans. Currently available as a used GM item only. The one you will receive will look similar to the one pictured. Tested and ready to go. Please make sure this is the one you need as it is non-returnable for any reason.

Fits all 67, 68, 69, 70, 71, and 72 cars

PART NUMBER: TRA-922
1964 - 1967 Chevelle CONVERTIBLE TH400 & 2004R Transmission Crossmember
1964 - 1967 Chevelle CONVERTIBLE TH400 & 2004R Transmission Crossmember
Our Price: $269.95
Sale Price: $249.95
You save $20.00!

New transmission crossmember for your 1964 - 1967 CONVERTIBLE Chevelle. Fits the following transmissions: TH400 & 2004R. Finished in a black powder coat. Includes new mounting hardware.

Our NEW high performance G Force Chevrolet coupe transmission crossmember gives you the room to run a true dual exhaust system. This transmission crossmember has a double hump design, which gives you plenty of ground clearance!

Our A-body crossmember is a direct bolt on. Made from boxed tubing (1/8 in. thick) to handle the frame twisting power of your high performance small block, big block, or LS1, LS2, LS3, or LSX engine.

Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately part # TRA-724.

1964 - 1967 CONVERTIBLE (note: distance between crossmember frame holes is approximately 43-1/4″. Measure your frame or crossmember to insure proper selection)

PART NUMBER: TRA-4203
1964 - 1967 200R4, TH400 Short Tail & 1968 - 1972 4L80E, 4L85E Hardtop Transmission Crossmember
1964 - 1972 Chevelle HARDTOP 200R4, TH400 Short Tail, 4L80E, 4L85E Transmission Crossmember
Our Price: $269.95
Sale Price: $249.95
You save $20.00!

New transmission crossmember for your 64 - 72 HARDTOP Chevelle. Fits the following transmissions: 1964 - 1967 200R4, TH400 short tail and 1968 - 1972 4L80E, 4L85E. Also will accommodate 4L60E in some 1967’s that have 8 crossmember holes on each side of the frame.

Our NEW high performance G Force Chevrolet coupe transmission crossmember gives you the room to run a true dual exhaust system with a short tail TH-400, 4L80E. This transmission crossmembers has a double hump design, which gives you plenty of ground clearance!

Our A-body crossmembers is a direct bolt on. Made from boxed tubing (1/8 in. thick) to handle the frame twisting power of your high performance small block, big block, or LS1, LS2, LS3, or LSX engine.

Finished in a black powder coat. Includes new mounting hardware. Purchase transmission mount separately part # TRA-724.

1968-1972, hardtops (note: distance between crossmember frame holes is approximately 53-5/8″. Measure your frame or crossmember to insure proper selection)

PART NUMBER: TRA-4200
1968 - 1970 Chevelle Master Clutch Linkage Kit
1968 - 1970 Chevelle Master Clutch Linkage Kit
Our Price: $249.95

Complete with everything you need including pedal and clutch fork for 68 - 70 Chevelle. Excellent quality! Kit includes: upper push rod, upper rod boot, 3 rod clips, frame side bracket, block side stud with seal, 2 bellcrank felts (only one required), lower adjustable rod, return spring, clutch fork to bellhousing rubber boot, bellcrank assembly with installed pivot kit, frame side ball stud with nut and washer and grease zerk fitting, clutch and brake pedal assembly, 2 pedal pads and the clutch fork.

*Fits Small Block & Big Block engines.


PART NUMBER: CLU-4021
Clutch Flywheel, Manual Transmission, 11 Inch, USA Made
Clutch Flywheel, Manual Transmission, 11 Inch, USA Made
Our Price: $239.95

New correct design flywheel for your Chevelle or Nova. Exact fit for all larger eleven inch clutch set ups. Overall measurement is 14 inches and has 168 teeth. Fits all internally balanced small block and big block engines. Will not work for 400 or 454 externally balanced engines or newer style one piece rear main seal engines. If you want the best oe quality flywheel on the market, here it is.

PART NUMBER: CLU-76
1964 - 1967 Chevelle Hurst Shifter Linkage Install Kit, for Muncie Transmission
1964 - 1968 Chevelle Hurst Shifter Linkage Install Kit, for Muncie Transmission
Our Price: $199.95
Sale Price: $189.95
You save $10.00!

1964 - 1968 Chevelle Hurst Shifter Linkage Install Kit, for Muncie Transmission

If you don't like your original Muncie shifter in your 64, 65, 66, 67 or 68 Chevelle this installation kit is for you. This kit allows you to hook up a Hurst Competition Plus shifter to your 68 or older Muncie transmission. Excellent Hurst linkage and installation kit. Complete kit ready to install your Hurst Competition / Plus shifter to your Muncie transmission. Includes all rods, levers, linkage, bushings, and hardware to get the job done right the first time. Will work great with PART# TRA-4550 Shifter for 64-67 models and TRA-4553 for 68 models. Order yours today!

Fits with or without console

PART NUMBER: TRA-4551
1968 - 1972 Chevelle Hurst Shifter Linkage Install Kit, for Muncie Transmission
1969 - 1972 Chevelle Hurst Shifter Linkage Install Kit, for Muncie Transmission
Our Price: $199.95
Sale Price: $187.24
You save $12.71!

1969 - 1972 Chevelle Hurst Shifter Linkage Install Kit, for Muncie Transmission

If you don't like your original Muncie shifter in your 69, 70, 71, or 72 Chevelle this installation kit is for you. This kit allows you to hook up a Hurst Competition Plus shifter to your 69 or newer Muncie transmission. Excellent Hurst linkage and installation kit. Complete kit ready to install your Hurst Competition / Plus shifter to your Muncie transmission. Includes all rods, levers, linkage, bushings, and hardware to get the job done right the first time. Order yours today!

Fits with or without console

PART NUMBER: TRA-4552
1966 - 1972 Chevelle Clutch Bellhousing, 11 Inch, 3899621
1966 - 1972 Chevelle Clutch Bellhousing, 11 Inch, 3899621
Our Price: $179.95

New re-issue correct design GM 11" inch bellhousing for your Chevelle. Exact fit for all cars with the larger eleven inch diameter clutch discs. Correct fit for all four speed equipped. Features original GM part number # 3899621.

PART NUMBER: CLU-621-CH
1968 - 1972 Chevelle Transmission Crossmember
1968 - 1972 Chevelle Transmission Crossmember
Our Price: $159.95

New transmission cross member for your Chevelle. Works great for all 68, 69, 70, 71, and 72 models.

**Please Note ~ If your a four speed modeld, this crossmember does not have the raised mounting location to install original style Muncie shifters.

PART NUMBER: TRA-4024
Muncie Transmission Rebuild Set 7/8"
Muncie Transmission Rebuild Set 7/8"
Our Price: $139.95

Muncie rebuild set 7/8 inch. Includes new synchros countershaft all bearings sleeves seals and gaskets. M-20 and M-21 transmissions with 7/8 inch diameter countershafts

PART NUMBER: TRA-97
Clutch Flywheel, Manual Transmission, 11 Inch, Imported
Clutch Flywheel, Manual Transmission, 11 Inch, Imported
Our Price: $139.95

New correct design flywheel for your Chevelle or Nova. Exact fit for all larger eleven inch clutch set ups. Overall measurement is 14 inches and has 168 teeth. Fits all internally balanced small block and big block engines. Will not work for 400 or 454 externally balanced engines or newer style one piece rear main seal engines. Replaces GM part# 3991469

PART NUMBER: CLU-76B
Clutch Flywheel, Manual Transmission, 454 with Weights
Clutch Flywheel, Manual Transmission, 454 with Weights
Our Price: $139.95

New correct design flywheel for your Chevelle or Nova. Exact fit for all larger 12" clutch set ups. Fits 454 externally balanced big block engines.

PART NUMBER: CLU-76B
Muncie Transmission Rebuild Set 1"
Muncie Transmission Rebuild Set 1"
Our Price: $139.95

Muncie rebuild set 1inch. Includes new synchros countershaft all bearings sleeves seals and gaskets. M-20 and M-21 transmissions with 1 inch diameter countershaft.

PART NUMBER: TRA-96
Clutch Flywheel, Manual Transmission 4-Speed, 10.5 Inch
Clutch Flywheel, Manual Transmission 4-Speed, 10.5 Inch
Our Price: $129.95

New correct size flywheel for your camaro. Exact fit for all Chevelle & Nova models with 10.5 inch diameter clutch set ups. Overall measurement is 12 and 3/4 inches.

PART NUMBER: CLU-75
1967 Chevelle Muncie Four Speed Chrome Shifter Handle for Bucket Seats
1967 Chevelle Muncie Four Speed Chrome Shifter Handle w/ Pull-up Rabbit Ears for Bucket Seats
Our Price: $139.95
Sale Price: $119.95
You save $20.00!

1967 Chevelle Muncie Four Speed Chrome Shifter Handle w/ Pull-up Rabbit Ears for Bucket Seats

New Chrome Shifter Handle with Rabbit Ears for your 67 Chevelle. This handle is made for most original muncie shifters. The chrome handle lever is designed for the 1967 Chevelle with bucket seats.

PART NUMBER: TRA-4557
1964 - 1966 Chevelle Muncie Four Speed Chrome Shifter Handle for Bucket Seats
1964 - 1966 Chevelle Muncie Four Speed Chrome Shifter Handle w/ Pull-up Rabbit Ears for Bucket Seats
Our Price: $119.95
Sale Price: $109.95
You save $10.00!

1964 - 1966 Chevelle Muncie Four Speed Chrome Shifter Handle w/ Pull-up Rabbit Ears for Bucket Seats

New Chrome Shifter Handle with Rabbit Ears for your 64-66 Chevelle. This handle is made for most original muncie shifters. The chrome handle lever is designed for the 64, 65, and 66 Chevelle models with bucket seats.

PART NUMBER: TRA-4556
1971 - 1972 Chevelle Clutch Linkage Kit
1971 - 1972 Chevelle Clutch Linkage Install Kit
Our Price: $109.95

Complete with everything you need from pedal to clutch fork for 71 - 72 Chevelle. Excellent quality! Kit includes: upper push rod, upper rod boot, 3 Rod clips, frame side bracket, block side stud with seal, 2 Bellcrank felts (only one required), lower adjustable rod, return spring, return spring bracket, clutch fork to bellhousing rubber boot, bellcrank assembly with installed pivot kit, frame side ball stud with nut and washer and grease zerk fitting.

*Fits Small Block & Big Block engines

PART NUMBER: CLU-4020
Clutch Flywheel Dust Cover Inspection Plate, Automatic Transmission, Turbo 350
Clutch Flywheel Dust Cover Inspection Plate, Automatic Transmission, Turbo 350
Our Price: $119.95
Sale Price: $109.95
You save $10.00!

New automatic transmission cover panel for your Chevelle or Nova. Exact fit for all models with a turbo 350 transmission. Correct black steel as original.

PART NUMBER: CLU-43
1970 - 1972 Intake TCS Solenoid Assembly for Big Block Engines
1970 - 1972 Intake TCS Solenoid Vacuum Switch Assembly for Big Block Engines
Our Price: $99.95

1970 - 1972 Intake TCS Solenoid Vacuum Switch Assembly for Big Block Engines

This solenoid mounts at the carburetor and has 2 flat electric thermal style prongs and 3 port vacuum outlets. Bracket mounts to the carburetor stud on your intake. Limited run from the OEM supplier.

Fits all 70 71 72 1970 1971 1972 Chevelle & Nova models

Part Number: TRA-1029
1968 - 1970 Chevelle Clutch Linkage Install Kit
1968 - 1970 Chevelle Clutch Linkage Install Kit
Our Price: $99.95

1968 - 1970 Chevelle Clutch Linkage Install Kit

New clutch linkage install kit for your Chevelle. Works great for all 1968 - 1970 models. This excellent quality kit includes; upper push rod, upper rod boot, 3 rod clips, frame side bracket, block side stud with seal, 2 bell crank felts (only one required), lower adjustable rod, return spring, clutch fork to bellhousing rubber boot, bellcrank assembly with installed pivot kit, frame side ball stud with nut and washer and grease zerk fitting.

*Fits Small Block & Big Block engines.

PART NUMBER: CLU-4019
1971 - 1972 Chevelle Automatic Shifter Overdrive Conversion Kit
1971 - 1972 Chevelle Automatic Shifter Overdrive Conversion Kit
Our Price: $99.95

New conversion kit for upgrading your turbo 350 or turbo 400 shifter to adapt to a newer overdrive transmission. Use your factory-installed automatic floor shifter with a newer 4-speed overdrive (TH700-R4 , TH200-4R or 4L60) transmission. This kit uses your original shifter cable. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, console indicator OD lens, all necessary hardware, and instructions.

PART NUMBER: CON-4067
1968 - 1970 Chevelle Automatic Shifter Overdrive Conversion Kit
1968 - 1970 Chevelle Automatic Shifter Overdrive Conversion Kit
Our Price: $99.95

New conversion kit for upgrading your turbo 350 or turbo 400 shifter to adapt to a newer overdrive transmission. Use your factory-installed automatic floor shifter with a newer 4-speed overdrive (TH700-R4 , TH200-4R or 4L60) transmission. This kit uses your original shifter cable. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, console indicator OD lens, all necessary hardware, and instructions.

PART NUMBER: CON-4066
1969 - 1972 Nova 4-Speed Reverse Lock Out Linkage Kit, Small Block
1969 - 1972 Chevelle 4 Speed Reverse Lock Out Linkage Kit
Our Price: $109.95
Sale Price: $99.00
You save $10.95!

1969 - 1972 Chevelle 4 Speed Reverse Lock Out Linkage Kit

Four-speed reverse lock out linkage for 69 - 72 Chevelle models. Complete linkage kit with upper and lower lock out rods, bellcrank assembly, and hardware. This set will mount at your lower steering column down to your subframe, and then back toward your transmission. Correct for all four speed models. Enables your back up light switch and your reverse lock out key system to work.

Fits all 69, 70, 71, and 72 Chevelle models

PART NUMBER: TRA-4048
1964 - 1966 Chevelle Clutch and Brake Pedal Assembly
1964 - 1966 Chevelle Clutch and Brake Pedal Assembly
Our Price: $99.00

New clutch and brake pedal assembly for your Chevelle. Exact fit for all models with a manual transmisison. Works for three or four speed cars.

PART NUMBER: CLU-4001
1964 - 1972 Chevelle / Nova Center Kickdown Swivel Linkage Bellcrank For Power Glide
1964 - 1972 Chevelle / Nova Center Kickdown Swivel Linkage Bellcrank For Power Glide
Our Price: $104.95
Sale Price: $94.95
You save $10.00!

Correct NEW center kick down swivel linkage bellcrank bracket for 1964 - 1972 Power Glide Transmissions. Mounts on the side of your trans bellhousing. Exact fit for all power glide transmission equipped cars.

Shown assembled with upper and lower rods for your reference only

Fits: 1964 - 1972 Chevelle & 1968 - 1972 Nova

PART NUMBER: TRA-61