Home > Chevelle Parts > Chevelle Interior > Chevelle Pedals & Parts
Sort By:
Page of 2
1966 - 1972 Chevelle and 1968 - 1972 Nova Wilwood Forged Dynalite Big Brake Front Disc Brake Kit Red Calipers
1966 - 1972 Chevelle and 1968 - 1972 Nova Wilwood Forged Dynalite Big Brake FRONT Disc Brake Kit Red Calipers
Our Price: $927.49

1966 - 1972 Chevelle and 1968 - 1972 Nova Wilwood Forged Dynalite Big Brake FRONT Disc Brake Kit Red Calipers

FDL Big Brake Front Hub Kits provide the added advantage of larger diameter brake rotors for traditional non-ABS spindles on American muscle cars and vintage rods. Forged billet Dynalite Red Calipers, 12.19” diameter rotors, and high performance Wilwood brake pads generate big brake stopping power to compliment wheel, tire, and suspension upgrades on all types of custom show and performance street / strip machines. The red powder coated caliper finish and rotor design provide custom builders with the ability to personalize the style and performance requirements of the mildest to the wildest machines.

Mount Type: Lug
Caliper Type: 4 - Red Powder Coat
Rotor Diameter: 12.19
Min Wheel Diameter Req'd: *15"
*This Brake Kit may fit 15-inch wheels

THIS FRONT BRAKE KIT HAS AN HUB OFFSET OF: +.19
This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle.

NOTE: Check the third picture. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

PART NUMBER: BRC-4991
1966 - 1972 Chevelle and 1968 - 1972 Nova Wilwood Forged Dynalite Big Brake Rear Disc Brake Kit Red Calipers
1966 - 1972 Chevelle and 1968 - 1972 Nova Wilwood Forged Dynalite Big Brake REAR Disc Brake Kit Red Calipers
Our Price: $844.50

1966 - 1972 Chevelle and 1968 - 1972 Nova Wilwood Forged Dynalite Big Brake REAR Disc Brake Kit Red Calipers

This REAR DISC BRAKE KIT has parking brakes and is made to fit a Chevy 10 or 12 Bolt Rear End


This group of FDL Pro-Series rear disc kits provides a complete solution for popular muscle car rear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19” one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. The red powder coated caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application.

Rear End Axle: 10 or 12 Bolt
Axle Offset: 2.81
Mount Type: Lug
Caliper Type: 4 - Red Powder Coat
Rotor Diameter: 12.19
Min Wheel Diameter Req'd*: 15"

THIS REAR BRAKE KIT HAS AN AXLE OFFSET OF: 2.81

Notes:
1. For OE C-Clip axles only. Does not support Special End or C-Clip Eliminator modifications
2. Kit may fit some 15" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
3. Fits Chevy 10 or
12 Bolt - Rear Kit

NOTE: Check the third picture. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

PART NUMBER: BRC-4992
1967 Chevelle Clutch and Brake Pedal Assembly
1967 Chevelle Clutch and Brake Pedal Assembly
Our Price: $109.00

New Clutch and Brake Pedal Assembly for your 1967 Chevelle. This OE Style replacement part fits all 67 Chevelles with a manual transmission.

PART NUMBER: CLU-4009
Lokar 1964 - 1972 Chevelle Black Billet Aluminum Curved Brake and Clutch Pad Pair
Lokar 1964 - 1972 Chevelle Black Billet Aluminum Curved Brake and Clutch Pad Pair
Our Price: $98.95

Lokar 1964 - 1972 Chevelle Black Billet Aluminum Curved Brake and Clutch Pad Pair

These Lokar brake and clutch pads are designed to bolt directly to the factory steel brake and clutch pedals. Black aluminum finish with rubber inserts.

PART NUMBER: PPD-4073
Lokar 1964 - 1972 Chevelle Brushed Billet Aluminum Curved Brake and Clutch Pad Pair
Lokar 1964 - 1972 Chevelle Brushed Billet Aluminum Curved Brake and Clutch Pad Pair
Our Price: $98.95

Lokar 1964 - 1972 Chevelle Brushed Billet Aluminum Curved Brake and Clutch Pad Pair

These Lokar brake and clutch pads are designed to bolt directly to the factory steel brake and clutch pedals. Brushed aluminum finish with rubber inserts.

PART NUMBER: PPD-4072
Lokar Hi-Tech Black Braided Stainless Steel 36" Universal Throttle Cable
Lokar Hi-Tech Black Braided Stainless Steel 36" Universal Throttle Cable
Our Price: $70.95

Lokar Hi-Tech Black Braided Stainless Steel 36" Universal Throttle Cable

Lokar throttle cables are designed with a specially extruded liner for extended life of the cable - not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Installation instructions included. Cable housing is black stainless steel.

PART NUMBER: ACL-1074
Lokar Hi-Tech Braided Stainless Steel 36" Universal Throttle Cable
Lokar Hi-Tech Braided Stainless Steel 36" Universal Throttle Cable
Our Price: $64.95

Lokar Hi-Tech Braided Stainless Steel 36" Universal Throttle Cable

Lokar throttle cables are designed with a specially extruded liner for extended life of the cable - not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Installation instructions included. Cable housing is Stainless Steel.

PART NUMBER: ACL-1073
Lokar 1964 - 1972 Chevelle Black Billet Aluminum Curved Automatic Brake Pad with Rubber Inserts
Lokar 1964 - 1972 Chevelle Black Billet Aluminum Curved Automatic Brake Pad with Rubber Inserts
Our Price: $64.95

Lokar 1964 - 1972 Chevelle Black Billet Aluminum Curved Automatic Brake Pad with Rubber Inserts

Lokar pads are designed to bolt directly to the factory steel brake pedal and are fashioned after the corresponding factory rubber pad. Black aluminum finish with rubber inserts.

PART NUMBER: PPD-4071
Lokar 1964 - 1972 Chevelle Brushed Billet Aluminum Curved Automatic Brake Pad with Rubber Inserts
Lokar 1964 - 1972 Chevelle Brushed Billet Aluminum Curved Automatic Brake Pad with Rubber Inserts
Our Price: $64.95

Lokar 1964 - 1972 Chevelle Brushed Billet Aluminum Curved Automatic Brake Pad with Rubber Inserts

Lokar pads are designed to bolt directly to the factory steel brake pedal and are fashioned after the corresponding factory rubber pad. Brushed aluminum finish with rubber inserts.

PART NUMBER: PPD-4070
1966 - 1972 Chevelle Universal Adjustable Brake Pedal Rod Kit
1966 - 1972 Chevelle and Nova Universal Adjustable Brake Pedal Rod Kit
Our Price: $64.75

1966 - 1972 Chevelle and Nova Universal Adjustable Brake Pedal Rod Kit

Wilwood’s new brake pedal pushrod kit provides the last missing link when installing a custom or modified brake system. The kit includes several options for adjustable length rods, with the commonly found connection end hardware necessary to connect Original Equipment and aftermarket pedals to all common types of manual master cylinders and power brake boosters. Great fit for all 1966 - 1972 Chevelle and 68 - 72 Nova models with power brakes.

PART NUMBER: BRC-991
Lokar Hi-Tech Black Braided Stainless Steel 24" Universal Throttle Cable
Lokar Hi-Tech Black Braided Stainless Steel 24" Universal Throttle Cable
Our Price: $63.95

Lokar Hi-Tech Black Braided Stainless Steel 24" Universal Throttle Cable

Lokar throttle cables are designed with a specially extruded liner for extended life of the cable - not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Installation instructions included. Housing is black stainless steel.

PART NUMBER: ACL-1071
1970 - 1972 Chevelle Gas pedal assembly, Each
1970 - 1972 Chevelle Gas pedal assembly, Each
Our Price: $59.99

Gas pedal assembly for cable style linkage.

PART NUMBER: ACL-4002
1968 - 1969 Chevelle Gas pedal assembly, Each
1968 - 1969 Chevelle Gas pedal assembly, Each
Our Price: $59.99

Gas pedal assembly for cable style linkage

PART NUMBER: ACL-4001
Lokar Hi-Tech Stainless Steel 24" Universal Throttle Cable
Lokar Hi-Tech Braided Stainless Steel 24" Universal Throttle Cable
Our Price: $57.95

Lokar Hi-Tech Stainless Steel 24" Universal Throttle Cable

Lokar throttle cables are designed with a specially extruded liner for extended life of the cable - not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Installation instructions included. Housing is stainless steel.

PART NUMBER: ACL-1070
Lokar Hi-Tech Black 36" Universal Throttle Cable
Lokar Hi-Tech Black 36" Universal Throttle Cable
Our Price: $54.95

Lokar Hi-Tech Black 36" Universal Throttle Cable

Lokar throttle cables are designed with a specially extruded liner for extended life of the cable - not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Installation instructions included. Cable housing is black.

PART NUMBER: ACL-1075
Lokar Hi-Tech Black 24" Universal Throttle Cable
Lokar Hi-Tech Black 24" Universal Throttle Cable
Our Price: $46.95

Lokar Hi-Tech Black 24" Universal Throttle Cable

Lokar throttle cables are designed with a specially extruded liner for extended life of the cable - not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Installation instructions included. Cable housing is black.

PART NUMBER: ACL-1072
1967 - 1972 Chevelle Automatic Brake Pedal Assembly
1967 - 1972 Chevelle Automatic Brake Pedal Assembly
Our Price: $44.95

New automatic brake pedal assembly for your Chevelle. Exact fit for all 67 - 72 Chevelle with an automatic transmission. Correct shape, size, and fit. Accurate reproduction automatic brake pedal assembly for all 67-72 Chevelles.

*Pin and bushings not included.

PART NUMBER: PPD-4008
1968 - 1972 Chevelle Pedal Pad Kit, Manual Transmission with Disc
1968 - 1972 Chevelle Pedal Pad Kit, Manual Transmission with Disc
Our Price: $39.95

Pedal pad kit manual trans with disc for your 68, 69, 70, 71, 72 Chevelle.

PART NUMBER: PPD-1-CH
1968 - 1972 Chevelle Pedal Pad Kit, Manual Transmission without Disc
1968 - 1972 Chevelle Pedal Pad Kit, Manual Transmission without Disc
Our Price: $34.95

Pedal Pad Kit Manual trans w/o disk for 68, 69, 70, 71, 72 Chevelle.

PART NUMBER: PPD-2-CH
1968 - 1972 Chevelle / Nova Accelerator Throttle Cable Bracket, Quadrajet 3992376
1968 - 1972 Chevelle / Nova Accelerator Throttle Cable Bracket, Quadrajet 3992376
Our Price: $27.95

New throttle cable bracket for your Chevelle or Nova. Exact fit for all models with a quadrajet carburetor. Correct shape, size, and bends. Fits all models with a round mount cable and 327 / 350 / 396 / 427 / 454 / LS5 & L34 engines. Replaces original GM part numbers; 326564 , 3949071 , 3972618, 3993997 , and 3992376 perfectly.

Fits: 1968 - 1972 Nova & 1969 - 1972 Chevelle

PART NUMBER: ACL-421Q
1968 - 1972 Chevelle / Nova Accelerator Throttle Cable Bracket, Holley 3972619
1968 - 1972 Chevelle / Nova Accelerator Throttle Cable Bracket, Holley 3972619
Our Price: $24.95

New correct style accelerator throttle cable bracket for your Chevelle. Exact fit for all models with a holley carb and a round style throttle cable. Replaces original GM part number 3972619 perfectly.

Fits: 1968 - 1972 Nova & 1969 - 1972 Chevelle

PART NUMBER: ACL-421
1968 - 1972 Chevelle Pedal Pad Kit, Automatic Transmission with Disc
1968 - 1972 Chevelle Pedal Pad Kit, Automatic Transmission with Disc
Our Price: $22.95

Automatic Pedal Pad Kit With Disc for 68, 69, 70, 71, 72 Chevelle.

PART NUMBER: PPD-4010
1964 - 1972 Chevelle Brake Pedal Pivot Shaft, Automatic, OE Style
1964 - 1972 Chevelle Brake Pedal Pivot Shaft, Automatic, OE Style
Our Price: $15.95

New pedal pivot shaft for your Chevelle. Exact fit for all 64 - 72 models. This is the rod that is used to hold and pivot your automatic brake pedal to the under dash housing. This pin is hardened as original, comes with secure clip. Made in the USA!!

PART NUMBER: BRC-1006-CH
1968 - 1972 Chevelle / Nova Accelerator Gas Pedal Pad With Steel Backing
1968 - 1972 Chevelle / Nova Accelerator Gas Pedal Pad With Steel Backing
Our Price: $12.95

This high quality gas pedal accelerator pad has a heavy steel backing and more durable than the all plastic version that most cars came with. Premium quality!

Fits: 68 - 72 Chevelle & 68 - 72 Nova models

PART NUMBER: PPD-14
1966 - 1972 Chevelle Brake Pedal Pad with Auto Trans and Disc Brakes
1966 - 1972 Chevelle Brake Pedal Pad with Auto Trans and Disc Brakes
Our Price: $13.95
Sale Price: $11.95
You save $2.00!

1966 - 1972 Chevelle Brake Pedal Pad with Auto Trans and Disc Brakes

New Brake Pad for Automatic Transmission and Disc Brakes. This 1966 - 1972 Chevelle brake pedal pad measures 5 1/2" Long. This is the correct A-body auto with disc brake pad. Correct for all 66, 67, 68, 69, 70, 71, and 72 models with auto trans and disc brakes.

PART NUMBER: PPD-4003A
1964 - 1967 Chevelle Pedal Pad, Fuel Gas, Plastic
1964 - 1967 Chevelle Pedal Pad, Fuel Gas, Plastic
Our Price: $11.95

Gas pedal pad for all 1964, 1965, 1966 & 1967 Chevelle models. Mount to the floor as original. Replacement for GM # 3837887

PART NUMBER: PPD-4001
1964 - 1972 Chevelle Pedal Pad, Brake, Manual Transmission 4-Speed with Disc
1964 - 1972 Chevelle Pedal Pad, Brake, Manual Transmission 4-Speed with Disc
Our Price: $9.95

Brake pedal pad for 64-72 4-speed Chevelle models with disc brakes.

PART NUMBER: PPD-18-CH
1964 - 1967 Chevelle Pedal Studs, Fuel Gas, Floor Mounted, Pair
1964 - 1967 Chevelle Pedal Studs, Fuel Gas, Floor Mounted, Pair
Our Price: $9.95

Correct Threaded Stud set to mount your pedal pad. (years) 64 65 66 67 Chevelle

PART NUMBER: PPD-987-CH
1968 - 1972 Chevelle & Nova Green Accelerator Carburetor Return Spring 3923501 for Holley
1968 - 1972 Chevelle & Nova Green Accelerator Carburetor Return Spring 3923501 for Holley
Our Price: $9.95
Sale Price: $8.95
You save $1.00!

1968 - 1972 Chevelle and Nova Green Accelerator Carburetor Return Spring, Holley

68 - 72 Chevelle and Nova carburetor return spring, all 396 - 325hp, 396 - 350hp, 396 - 375hp, 427 - 425hp, 427 Yenko, and any other Holley carburetored big block. Spring is painted correct dark green as original. This spring replaces original GM part# 3923501.

PART NUMBER: ACL-55
1964 - 1972 Chevelle Pedal Pad, Brake, Automatic Transmission
1964 - 1972 Chevelle Pedal Pad, Brake, Automatic Transmission, Without Disc Brakes
Our Price: $8.95

New correct design rubber pedal cover for your 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971 or 1972 Chevelle. Works great for all cars with an automatic transmission. Measures 5 1/2" Long. Super easy to install, simply snap into place and put the pedal to the metal!

Fits: 64, 65, 66, 67, 68, 69, 70, 71 & 72 models.

PART NUMBER: PPD-4003
1967 - 1981 Chevelle and Nova Pedal Assembly Shaft Bushings Set, Brake and / or Clutch
1968 - 1972 Chevelle and Nova Pedal Assembly Shaft Bushings Set, Brake and / or Clutch
Our Price: $5.95

Pedal shaft bushings for 68 - 72 Chevelle and Nova models. Common cure for loose or sloppy pedals. Works great for automatic or manual transmission pedals. Sold as a set of 4 pieces.

1968 - 1972 Chevelle and Nova Pedal Assembly Shaft Bushings 4 Piece Set, Brake and / or Clutch

PART NUMBER: PPD-6827
1964 - 1975 Chevelle Pedal Pad, Emergency Parking Brake, Without Lettering
1964 - 1975 Chevelle Pedal Pad, Emergency Parking Brake, Without Lettering
Our Price: $5.95

New custom emergency parking brake pedal pad cover for your Chevelle. NO LETTERING!! Super easy to install, just wrap into place.

Fits all 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, and 75 models.

PART NUMBER: PPD-9C-CH
1968 - 1972 Chevelle Pedal Pad Trim, Fuel Gas, Stainless Steel
1968 - 1972 Chevelle Pedal Pad Trim, Fuel Gas, Stainless Steel
Our Price: $5.95

1968 - 1972 Chevelle Pedal Pad Trim, Fuel Gas, Stainless Steel

Gas pedal pad trim for 68 - 72 Chevelle models. Stainless steel like original units.

PART NUMBER: PPD-15-CH
1968 - 1972 Chevelle Pedal Pad Spring, Fuel Gas
1968 - 1972 Chevelle Pedal Pad Spring, Fuel Gas
Our Price: $5.95

Gas pedal pad spring for 68 - 72 Chevelle.

PART NUMBER: PPD-16-CH
1964 - 1972 Chevelle  Pedal Pad Trim, Clutch & Brake
1964 - 1972 Chevelle Pedal Pad Trim, Clutch & Brake
Our Price: $5.95

This part works for both 1964-1972 Chevelle clutch pedal and brake pedal trim for cars with manual transmission.

PART NUMBER: PPD-21-CH
1964 - 1975 Chevelle Pedal Assembly Bracket Stopper, Brake and, or Clutch, Replaces GM 3723230
1964 - 1975 Chevelle Pedal Assembly Bracket Stopper, Brake and, or Clutch, Replaces GM 3723230
Our Price: $5.95

1964 - 1975 Chevelle Pedal Assembly Bracket Stopper, Brake and, or Clutch, Replaces GM 3723230

New correct size rubber bumper for your Chevelle. Exact fit for all 64 - 75 models. Installs on your under dash pedal support brace. Allows for proper alignment of clutch and brake pedals.

*Note: Requires 1 for automatic transmission models. Requires 2 for manual transmission models.

PART NUMBER: PPD-824-CH
1964 - 1972 Chevelle / Nova Brake Pedal Return Spring, Replaces GM 3850084
1964 - 1972 Chevelle / Nova Brake Pedal Return Spring, Replaces GM 3850084
Our Price: $5.95

1964 - 1972 Chevelle / Nova Brake Pedal Return Spring, Replaces GM 3850084

NEW correct Brake Pedal Return Spring for all 64 - 69 Chevelle and 68 - 72 Nova models. Replaces GM part # 3850084 perfectly. Brings the brake pedal, both manual and automatic, back to the correct height after braking. Correct tension and made on the original tooling for an exact fit. Get the pedal to the metal and order yours today.

Fits:
Chevelle 64, 65, 66, 67, 68 and 69
Nova 68, 69, 70, 71 and 72

PART NUMBER: PPD-831
Custom Chrome Plated Throttle Return Spring Bracket, SBC & BBC
Custom Chrome Plated Throttle Return Spring Bracket, SBC & BBC
Our Price: $7.95
Sale Price: $4.95
You save $3.00!

Custom Chrome Plated Throttle Return Spring Bracket, SBC & BBC

Swap out your old, boring throttle return spring bracket with this new custom chrome one today! These brackets have a slotted design that's beautifully chrome plated for added beauty under your hood. When you're dressing up under the hood, even the little pieces add to the show car look. This bracket can mount easily to your carburetor or intake manifold on either Small Block or Big Block Chevy engines. This new throttle spring bracket will give you a lot of show for a little dough, order yours today!

Fits Both BBC and SBC engines

PART NUMBER: ACL-425
1968 - 1972 Chevelle Pedal Pad, Fuel Gas
1968 - 1972 Chevelle Pedal Pad, Fuel Gas
Our Price: $4.95

Gas pedal pad for 68 - 72 Chevelle.

PART NUMBER: PPD-13-CH
1964 - 1972 Chevelle Pedal Pad, Clutch, Manual Transmission
1964 - 1972 Chevelle Pedal Pad, Clutch, Manual Transmission
Our Price: $4.95

New correct design clutch pedal pad for your Chevelle. Exact fit for all 64 - 72 models with a manual, three or four speed transmission. Replaces original GM part number 3921648 perfectly.

PART NUMBER: PPD-22-CH