Home > Chevelle Parts > Chevelle Engine Components > Chevelle Engine Parts
Sort By:
Page of 9
1970 Chevelle Short Block Engine, Big Block 396 - 375, GM Original
1970 Chevelle Short Block Engine, L78 Big Block 396 - 375, GM Original
Our Price: $5,000.00

Extra cool 396 / 375 L78 short block engine for your Chevelle. Fresh from a 20 year old GM parts collection. Original casting # 3969854 with a CKO stamped suffix correct for 70 Super Sport Chevelles with a 4 speed transmission. Great looking engine that still has some ultra hard to find pieces. VIN # 10A111788 , The real deal! Checked with the L78 registry and all info matches. Only a total of " 2144 " 1970 Chevelles were produced with 396 - 375 horse power engine. How many are left?

* 396 Block GM part # 3969854 with a casting date = J 8 9
* Pad assembly date stamped and coded T1028CKO
* All 8 ~ 3969854 ( 4.125 ) pistons still intact

PART NUMBER: 3969854
1969 Chevelle Engine, Big Block 396, GM Original
1969 Chevelle Engine, Big Block 396, GM Original
Our Price: $4,900.00

Extra cool 396 engine for your Chevelle. Fresh from a 20 year old GM parts collection. Original casting # 3955272 with a JA stamped suffix correct for 69 Super Sport Chevelles with a 4 speed transmission. Great looking engine that still has some ultra hard to find pieces. VIN number stamped by the oil filter 9K465051. The real deal! * 396 Block GM part # 3955272 with a casting date = J 21 8 Pad assembly date stamped and coded TO619JA * Both heads 3931063 with date codes of D 24 9 and E 15 9 * Intake manifold part # 3931067 with a date code of F 5 9 * Exhaust manifold Left Hand 3909879 * Exhaust manifold Right Hand 3916178 *Water Pump part # 3969811 date code D 30 9 * Real "AC" Logo Fuel Pump * Ultra rare 3955290 crank pulley

PART NUMBER: 3955272-CH
1969 Carburetor, Holley 4346 - 780 CFM , 396 , 427 - 3959164
1969 Carburetor, Holley 4346 - 780 CFM , 396 , 427 - 3959164
Our Price: $699.95

New correct design Holley carb for your 69 Chevelle and Nova. Exact for all 1969 big block 396 / 375 and 427 / 425 high performance models. 780 CFM delivers the needed fuel to give optimum response to your ride. Features original GM part number 3959164 holley list number 4346 - on the front air horn, just like originals. This is a brand new in the box Holley carb. Gold iradite plating as factory units. Fresh to date technology with the right old school look. Tested and guaranteed, ready to rock!
Exact fit for all 69 , 396 / 375 and 427 / 425 models
PART NUMBER: ENC-844
New Big Block Chevy V-Belt Front Drive System with Power Steering, Polished Billet Aluminum
New Big Block Chevy V-Belt Front Drive System with Power Steering, Polished Billet Aluminum
Our Price: $689.95
Sale Price: $629.95
You save $60.00!

OVERVIEW

Top Street Performance is proud to offer a one-year warranty.

If you're looking to give your Big Block Chevy a face lift but don't want the hassle of sourcing everything you need piece by piece? Look no further than TSP's Big Block Front Drive System. With polished pulleys and chrome brackets and accessories, it comes with everything but the belts. It's great for a stock refresher or engine swap.

TSP front drive kits are composed of machined aluminum brackets and pulleys for precision and style.

BRACKETS AND PULLEYS

Easily the biggest draw to this kit are the brackets and pulleys. The entire system is comprised of CNC-machined 6061-T6 billet aluminum for a perfect fit. The pulleys are given a pristine polish, and brackets are full chrome for an overall beautiful look guaranteed to draw attention.

TSP's high-flow pumps offer awesome cooling power with beatiful looks to match.

WATER PUMP

Providing the cooling for this kit is TSP's high-flow mechanical water pump. This long-neck style pump features heavy duty bearings and seals and an 8-blade, cast aluminum anti-cavitation impeller to flow at about 40% above the stock pump. Cast from lightweight aluminum, it's been given a beautiful chrome finish.

Reliability and looks are to the max with TSP's Saginaw power steering pump.

POWER STEERING PUMP

When it came time to address power steering with this kit, we looked only at the classic Saginaw pump. There's a reason why this is as popular as it is, and we've constructed ours using top quality materials and manufacturing methods to ensure solid performance. It too is presented here in a gorgeous chrome.

TSP's chrome hot-rod style alternator gets the job done with 110 amps.

ALTERNATOR

Finishing off this front drive kit is our 110-amp GM 10SI style alternator. Also in chrome, this beauty rounds out the kit nicely. Taking the ever-popular hot-rod style alternator and giving it some extra juice, this is one of our top-selling products on its own.

CHEVROLET BIG BLOCK V8 GEN. II (MARK IV)

  • 6.5 L / 396 in3
  • 6.6 L / 402 in3
  • 7.4 L / 454 in3

FITMENT NOTES

  • Due to the relocation of certain accessories, may not fit all stock applications


Part Number: ENC-1215
1965 - 1967 Chevelle Hood Hinges, Billet, Satin Finish, Pair
1965 - 1967 Chevelle Hood Hinges, Billet, Satin Finish, Pair
Our Price: $599.95

These billet hood hinges for 65 - 67 Chevelle are CNC machined to perfection. They are made of 6061-T6 billet aluminum and utilize sealed bearings for smooth and long lasting operation. Our hinges come complete with stainless steel gas struts and mounting hardware.

PART NUMBER: SHE-1304-CH
New Small Block Chevy Front Drive System, Polished Billet Aluminum
New Small Block Chevy V-Belt Front Drive System with Power Steering, Polished Billet Aluminum
Our Price: $629.95
Sale Price: $569.95
You save $60.00!

OVERVIEW

Top Street Performance is proud to offer a one-year warranty.

If you're looking to give your Small Block Chevy a face lift but don't want the hassle of sourcing everything you need piece by piece? Look no further than TSP's Small Block Front Drive System. With polished pulleys and chrome brackets and accessories, it comes with everything but the belts. It's great for a muscle car and perfect for a Chevelle or Nova.

TSP front drive kits are composed of machined aluminum brackets and pulleys for precision and style.

BRACKETS AND PULLEYS

Easily the biggest draw to this kit are the brackets and pulleys. The entire system is comprised of CNC-machined 6061-T6 billet aluminum for a perfect fit. The pulleys are given a pristine polish, and brackets are full chrome for an overall beautiful look guaranteed to draw attention.

TSP's high-flow pumps offer awesome cooling power with beatiful looks to match.

WATER PUMP

Providing the cooling for this kit is TSP's high-flow mechanical water pump. This long-neck style pump features heavy duty bearings and seals and an 8-blade, cast aluminum anti-cavitation impeller to flow at about 40% above the stock pump. Cast from lightweight aluminum, it's been given a beautiful chrome finish.

Reliability and looks are to the max with TSP's Saginaw power steering pump.

POWER STEERING PUMP

When it came time to address power steering with this kit, we looked only at the classic Saginaw pump. There's a reason why this is as popular as it is, and we've constructed ours using top quality materials and manufacturing methods to ensure solid performance. It too is presented here in a gorgeous chrome.

TSP's chrome hot-rod style alternator gets the job done with 110 amps.

ALTERNATOR

Finishing off this front drive kit is our 110-amp GM 10SI style alternator. Also in chrome, this beauty rounds out the kit nicely. Taking the ever-popular hot-rod style alternator and giving it some extra juice, this is one of our top-selling products on its own.

FITMENT

CHEVROLET SMALL BLOCK V8 GEN. I

  • 4.3 L / 262 in3
  • 4.3 L / 265 in3
  • 4.4 L / 267 in3
  • 4.6 L / 283 in3
  • 4.9 L / 302 in3
  • 5.0 L / 305 in3
  • 5.0 L / 307 in3
  • 5.4 L / 327 in3
  • 5.7 L / 350 in3
  • 6.6 L / 400 in3

FITMENT NOTES

  • Due to the relocation of certain accessories, may not fit all stock applications


Part Number: ENC-1214
1969 Big Block Distributor STAMPED 1111499 GM Original RESTORED Delco Remy
1969 Big Block Distributor STAMPED 1111499 GM Original RESTORED Delco Remy
Our Price: $400.00

GM Original Delco Distributors completely disassembled and professionally rebuilt only using original period correct Delco parts. These are then Stamped 1111499 and dated correct for 396-375hp 427-425hp Big Block 1969 Camaro, Chevelle, Impala, Nova and COPO models. Vacuum advance is correct for the 396 / 375hp engines and will not only look perfect but also function correctly. Stop looking for that needle in a haystack, order your correct 69 BB Distributor today! Made in the USA

*Choose Date Code: only in stock dates will be shown. Please call 859.408.2000 to special order your date stamped, allow 2-4 weeks for delivery.

Vacuum Advance Stamped MS 355 15

PART NUMBER: ENC-939
1970 - 1972 Chevelle Air Cleaner, Dual Snorkel, Big Block
1970 - 1972 Chevelle Dual Snorkel Air Cleaner, Big Block
Our Price: $399.95

New exact air cleaner assembly for your Chevelle. Correct fit for all 70 - 72 L78 & L79 big block engine models without cowl induction (396, 402, 454). OE factory style dual snorkel air cleaner assembly with chrome lid. This dual snorkel air cleaner features correct snout with notch & pcv dimple on the outside. Look no more for this rare gem, here it is!
PART NUMBER: AIR-18A-CH
1968 - 1969 Chevelle / Nova Aluminum Intake Manifold L88 & ZL-1 396 / 427 # 3933198
1968 - 1969 Chevelle / Nova Aluminum Intake Manifold L88 & ZL-1 396 / 427 # 3933198
Our Price: $339.95

1968 - 1969 Chevelle / Nova Aluminum Intake Manifold L88 & ZL-1 396 / 427 # 3933198

New correct OE style aluminum intake manifold for 68 - 69 Chevelle / Nova. Exact fit for all big block engines. Brand new 1968-69 Chevrolet Big Block aluminum intake manifold. This manifold fits 1968 - 1969 Chevy Corvette, Camaro, Chevelle, Nova & Impala with L88 or ZL-1 and 396 HP or 427 HP motors. GM # 3933198, Firing Order 18436572 and Winters Snowflake all raised on this intake. Stop looking for a used one with good threads,,, here it is! This intake is as good as it gets!

PART NUMBER: ENC-1109
1968 - 1969 Chevelle Intake Manifold, Big Block, Aluminum, GM 3933163
1968 - 1969 Chevelle Intake Manifold, Big Block, Aluminum, GM 3933163
Our Price: $339.95

New correct intake manifold for your 1968 - 1969 Chevelle. Exact fit for all big block engines. Features original GM part number # 3933163 and winters foundry snowflake logo. Rectangular port design, used on all high performance engines. Stop looking for a used one with good threads,,, here it is! This intake is the real deal!

PART NUMBER: ENC-1002C-CH
1970 - 1971 Chevelle Intake Manifold, Big Block, Aluminum, GM 3963569
1970 - 1971 Chevelle Intake Manifold, Big Block, Aluminum, GM 3963569
Our Price: $339.95

New correct intake manifold for your 1970 - 1971 Chevelle. Features the correct GM part number 3963569 and winters foundry logo. Exact low profile design for hood clearance. Also fits 70 - 71 454/425 HP Corvette, Chevelle with 454/450 hp, LS-5 or LS-6, Monte Carlo Super Sport 402/375, Nova L-78, etc. Excellent quality!

PART NUMBER: ENC-1002-CH
Power Steering Pump Pulley, Single Deep Groove Cast 3873847
Power Steering Pump Pulley, Single Deep Groove Cast 3873847
Our Price: $179.95

1968 Nova or 1965 - 1968 Chevelle Power Steering Pump Pulley, Single Deep Groove Cast 3873847
Correct high performance single deep groove cast iron power steering pump pulley. This pulley replaces original GM part number 3873847 perfectly.

Exact fit for 396 / 375 or 427 / 425 horse power

PART NUMBER: ENC-146
Valve Covers, Big Block, BLACK ALUMINIUM Finned Classic Ribbed Design
Valve Covers, Big Block, BLACK ALUMINIUM Finned Classic Ribbed Design
Our Price: $199.95
Sale Price: $179.95
You save $20.00!

Get a great look at a great price with these new BBC BLACK Aluminum Valve Cover Set for your Camaro. Manufactured from premium quality aluminum coated BLACK then hand polished. Exact fit for all big block Chevy engines including 396, 427, 454 and 502. Sold in a pair only. These BB valve covers are sold in a set including bolts, baffles, grommets and screws. Order your new set today and SAVE!

Baffled: Yes
Breathers Included: No
Gaskets Included: No
Grommets Included: No
Valve Cover Hole Style: 1.25" Push-In Style
Mounting Hardware Included: Yes
Quantity: Sold as a Pair
Valve Cover Finish: Polished Black
Valve Cover Height: Tall Style (3-11/16")
Valve Cover Material: Cast Aluminum
Valve Cover Mounting Style: Perimeter Bolt
Valve Cover Top Style: Finned

PART NUMBER: ENC-89B
1966 Chevelle Air Cleaner Assembly (396/325 HP), Each
1966 Chevelle Air Cleaner Assembly (396/325 HP), Each
Our Price: $176.99

Air Cleaner Assembly (396/325 HP)

PART NUMBER: AIR-4013
1971 - 1972 Chevelle Air Conditioning Compressor Brackets, Big Block, Set
1971 - 1972 Chevelle Air Conditioning Compressor Brackets, Big Block, Set
Our Price: $194.75
Sale Price: $174.95
You save $19.80!

New correct air conditioning compressor bracket set for your Camaro. Exact fit for all 71 - 72 Chevelle models with a big block engine. This set includes all five mounting brackets to install the compressor in the correct location. Exact fit for all 396, 402, 427, 454, etc engines with long water pumps. Mounts your air conditioning compressor on the left hand drivers side.

Fits all 71 - 79 Chevy models with big block engines, except Corvettes

PART NUMBER: ENC-239K
1968 - 1972 Chevelle Cowl Vents, 3 Pieces, Without Air Conditioning, Billet Aluminum
1968 - 1972 Chevelle Cowl Vents, 3 Pieces, Without Air Conditioning, Billet Aluminum
Our Price: $174.95

Billet aluminum cowl vent set with aluminum mesh inset for all Chevelle models with out air conditioning. Replace you original plastic cowl vent grille inserts with this brilliant billet aluminum part. Includes mount brackets and stainless steel hardware. Be sure to choose your finish.

Fits all 68, 69, 70, 71 & 72 Chevelle models with out air conditioning

PART NUMBER: ENC-4269
1964 - 1974 Chevelle Breakerless SE Distributor Ignition System Upgrade Conversion Kit
1964 - 1974 Chevelle Breakerless SE Distributor Ignition System Upgrade Conversion Kit
Our Price: $169.95

This new BREAKERLESS-SE single wire ignition kit for your Camaro is designed to convert all 1957-74 GM V8 engines equipped with window-style distributor cap, screw-on type rotor, stock coil, and single or dual points, to solid-state electronic ignition. These maintenance-free modules will insure your car maintains its maximum performance. By utilizing a fully integrated trigger and power module, the entire kit fits completely under your distributor cap.Single-wire operation - This is the ONLY single-wire module available on the market. Which means to function, only the existing black wire leading from the distributor to the ignition coil is required. This not only simplifies installation, but PRESERVES THE STOCK APPEARANCE of the factory wiring. There is no chance of mis-wiring your distributor and no need to cut into your existing harness. Allows you to have the current, more advanced engine technology with the old school factory look.

PART NUMBER: ENC-253-CH
1968 Chevelle Chrome Valve Covers, Small Block
1968 Chevelle Chrome Valve Covers, Small Block
Our Price: $159.95

New correct design valve cover set for your Chevelle. Exact fit for all small block V8 models. Features the " O " stamp, exact details, show car ready. Replaces original GM part number 3923226 perfectly. Premium quality original style valve cover set, order yours today!



PART NUMBER: ENC-324-CH
1966 - 1972 Chevelle Valve Covers Kit, Big Block, High Grade
1966 - 1972 Chevelle Valve Covers Kit, Big Block, High Grade
Our Price: $159.95

This new complete set for 66 - 72 Chevelle includes; premium quality valve covers left and right with inner rocker arm oil drippers, original style cork gaskets, mounting bolts and washers, plug wire seperator stands, oil cap, rubber grommets and a correct tonawanda engine plant decal. This set features components that are factory correct with the right fit and appearance.

PART NUMBER: ENC-383-CH
1967 Chevelle Air Cleaner Assembly (396/325 HP), Each
1967 Chevelle Air Cleaner Assembly (396/325 HP), Each
Our Price: $144.95

New complete air cleaner assembly. Works great for most models with a 4-barrel carburetor. Includes chrome lid with installed rubber lip seal, breather filter, and inner tube with spark arrestor cap. Exact fit for 67 Chevelle, but can be added to any model if you want this old school look.

PART NUMBER: AIR-8-CH
1966 - 1972 Valve Covers, Big Block, Polished Aluminum
1966 - 1972 Chevelle / Nova Valve Covers, Big Block, Polished Aluminum
Our Price: $159.95
Sale Price: $139.95
You save $20.00!

New Polished Aluminum BB Chevy Valve Covers for 67 - 74 Camaro big block. Fits all Chevy Chevelle, Nova and other GM model Big Block engines from 1967 1974. Measures 2 7/8" tall. This set has the polished smooth top design that will enhance any BB Chevelle or Nova engine compartment. Great set at a great price. Order yours today.

Part Number ENC-223
1966 - 1967 Chevelle Air Cleaner Element Filter Assembly, Black Lid, OE Style
1966 - 1967 Chevelle Air Cleaner Element Filter Assembly, Black Lid, OE Style
Our Price: $139.95

New complete air cleaner assembly. Works great for most models with a 4-barrel carburetor. Includes black lid with installed rubber lip seal and breather filter. Fits 66 and 67 Chevelle.

PART NUMBER: AIR-7-CH
1968 Chevelle Valve Covers, Small Block, Correct
1968 Chevelle Valve Covers, Small Block, Correct
Our Price: $129.95

Matched set of LH and RH valve covers for your 68 Chevelle. These are powder coated black and can be painted any color you prefer. Also available in show chrome if desired. Premium quality!

PART NUMBER: ENC-411-CH
1964 - 1967 Chevelle Valve Covers, Small Block, "Chevrolet" Script, Black, Pair
1964 - 1967 Chevelle Valve Covers, Small Block, "Chevrolet" Script, Black, Pair
Our Price: $129.95

Correct stamped steel "Chevrolet" script valve covers for 64 - 67 Chevelle. Exact welded wire retainers included. Black in color, can be painted any color you desire. Sold in RH and LH pairs only. Premium quality.

PART NUMBER: ENC-377-CH
1964 - 1967 Chevelle Valve Covers, Small Block, Chrome, Classic
1964 - 1967 Chevelle Valve Covers, Small Block, Chrome, Classic
Our Price: $119.95

Super cool chrome small block valve covers for 64 - 67 Chevelle. Rectangle center area for your engine size decals. Sold in a pair only. Excellent quality!NOTE: Decals sold separately.

PART NUMBER: ENC-87-CH
Valve Covers, Big Block, POLISHED ALUMINIUM Finned Classic Ribbed Design
Valve Covers, Big Block, POLISHED ALUMINIUM Finned Classic Ribbed Design
Our Price: $129.95
Sale Price: $109.95
You save $20.00!

Get a great look at a great price with these new BBC Polished Aluminum Valve Cover Set for your Camaro. Premium quality aluminum, hand polished. Exact fit for all big block Chevy engines including 396, 427, 454 and 502. Sold in a pair only. These BB valve covers are sold in a set including bolts, baffles, grommets and screws. Order your new set today and SAVE!

*3-3/4" Inside Height to Clear Roller Rockers

PART NUMBER: ENC-89
1964 - 1972 Chevelle Horn Set, Original Style with Universal Mounting Brackets, Pair
1964 - 1972 Chevelle Horn Set, Original Style with Universal Mounting Brackets, Pair
Our Price: $109.95

Muscle Car Central now has a universal version of our reproduction Delco horns available for 62 - 72 Nova. Sold as a pair, this set of horns has all the features of our model specific Delco sets. They feature all of the correct Delco markings on each one of the horns. These horns look exactly the same as the Delco units installed on nearly all GM vehicles from the 60's and 70's.Included with the horns are a set of universal brackets that bolt to the back of the horn. With these brackets and the easy 1 wire connection, they can be mounted on nearly any GM car or truck. They will work on Chevrolet, Buick, Olds, Pontiac, and other vehicles.

PART NUMBER: STE-1229-CH
1964 - 1967 Chevelle Valve Covers, Classic
1964 - 1967 Chevelle Valve Covers, Classic
Our Price: $109.95

Classic valve covers for 64 - 67 Camaro. Chevy orange. All small block applications. Sold as a pair. These require the use of an oil fill tube, there are no holes in these valve covers.

PART NUMBER: ENC-86-CH
1969 - 1970 Chevelle / Nova Timing Chain Cover, 350, For 8 Inch Balancer
1969 - 1970 Chevelle / Nova Timing Chain Cover, 350, For 8 Inch Balancer
Our Price: $104.95

New correct design timing chain cover for your Chevelle or Nova. Exact fit for all 69 - 70 Chevy small block models with an 8 inch harmonic balancer; 350. Includes pre-welded timing cover tab pointer with the correct "A O R" markings.

Also correct for all 1969 - 1970 Corvette 350, 1969 - 1970 Camaro Z28 & SS350 engines. All cars with 8" harmonic balancers.

Replaces original GM Part# 3946870 exactly.

PART NUMBER: ENC-109A
1964 - 1972 Chevelle / Nova Fuel Pump Holley Avenger - Small Block Mechanical Fuel Pump
1964 - 1972 Chevelle / Nova Fuel Pump Holley Avenger - Small Block Mechanical Fuel Pump
Our Price: $99.95

New SB fuel pump for your Chevelle or Nova. Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

PART NUMBER: FUE-44C
New Chevy Big Block Fabricated Aluminum Valve Cover, Clear Anodized Finish
New Chevy Big Block Fabricated Aluminum Valve Cover, Clear Anodized Finish
Our Price: $109.95
Sale Price: $99.95
You save $10.00!

Newly designed Chevy Big Block fabricated Aluminum valve covers with clear anodized finish now available. These BB valve covers provide additional rocker clearance with great looks in the process. Add some race inspired style to your engine bay with this new Tall Fabricated Aluminum Valve covers for Big Block Chevy. No breather hole and billet 1/4" rails for a tight seal.These valve covers are finished in clear anodized for a clean fabricated look. All hardware is included to make installation a breeze. Sold as a pair

Mounting Style: Perimeter Bolt
Valve Cover Height: Tall
Top Style: Plain
Valve Cover Material: Fabricated Aluminum
Baffle: Included
Gaskets: Not Included
Grommets: Not Included
Mounting Hardware: Included
Quantity: Sold as Pair
Finish: Clear Anodized

ENGINE TYPE: Chevrolet Big Block V8 Gen. II (Mark IV)

Part Number: ENC-1213



Valve Covers, Small Block, POLISHED ALUMINIUM Finned Classic Ribbed Design - Tall
Valve Covers, Small Block, POLISHED ALUMINIUM Finned Classic Ribbed Design - Tall
Our Price: $119.95
Sale Price: $99.95
You save $20.00!

Get a great look at a great price with these new Tall SBC Polished Aluminum Valve Cover Set for your Camaro. Manufactured from premium quality aluminum then hand polished. Exact fit for all small block Chevy engines including 302, 307, 327, 350..ect. Sold in a pair only. These are made a little bit taller to clear most roller rocker arms! These SB valve covers are sold in a set including bolts, baffles, grommets and screws. Order your new set today and SAVE!

*3-1/2" Inside Height to Clear Roller Rockers

PART NUMBER: ENC-88T
Valve Covers, Small Block, BLACK ALUMINIUM Finned Classic Ribbed Design - Stock
Valve Covers, Small Block, BLACK ALUMINIUM Finned Classic Ribbed Design - Stock
Our Price: $119.95
Sale Price: $99.95
You save $20.00!

Get a great look at a great price with these new SBC BLACK Aluminum Valve Cover Set for your Chevelle or Nova. Manufactured from premium quality aluminum coated BLACK then hand polished. Exact fit for all small block Chevy engines including 302, 307, 327, 350..ect. Sold in a pair only. These SB valve covers are sold in a pair. Order your new set today and SAVE!

*Stock Height

Baffled: Yes
Breathers Included: No
Gaskets Included: No
Grommets Included: No
Valve Cover Hole Style: 1.25" Push-In Type
Mounting Hardware Included: No
Quantity: Sold as a Pair
Valve Cover Finish: Polished black
Valve Cover Height Short (OEM) Style: (2-9/16")
Valve Cover Material: Cast Aluminum
Valve Cover Mounting Style: Perimeter Bolt
Valve Cover Top Style: Full Finned

PART NUMBER: ENC-88B
Valve Covers, Small Block, BLACK ALUMINIUM Finned Classic Ribbed Design - Tall
Valve Covers, Small Block, BLACK ALUMINIUM Finned Classic Ribbed Design - Tall
Our Price: $119.95
Sale Price: $99.95
You save $20.00!

Get a great look at a great price with these new SBC BLACK Aluminum Valve Cover Set for your Chevelle or Nova. Manufactured from premium quality aluminum coated BLACK then hand polished. Exact fit for all small block Chevy engines including 302, 307, 327, 350..ect. These are made a little bit taller to clear most roller rocker arms! These SB valve covers are sold in a pair. Order your new set today and SAVE!

*3-1/2" Inside Height to Clear Roller Rockers

Baffled: Yes
Breathers: Included No
Gaskets Included: No
Grommets Included: No
Valve Cover Hole Style: 1.25" Push-In Type
Mounting Hardware Included: No
Quantity: Sold as a Pair
Valve Cover Finish: Polished black
Valve Cover Height: Tall Style (3-11/16")
Valve Cover Material: Cast Aluminum
Valve Cover Mounting Style: Perimeter Bolt
Valve Cover Top Style: Full Finned

PART NUMBER: ENC-88TB
Valve Covers, Small Block, POLISHED ALUMINIUM Finned Classic Ribbed Design - Stock
Valve Covers, Small Block, POLISHED ALUMINIUM Finned Classic Ribbed Design - Stock
Our Price: $119.95
Sale Price: $99.95
You save $20.00!

Get a great look at a great price with these new SBC Polished Aluminum Valve Cover Set for your Chevelle or Nova. Manufactured from premium quality aluminum then hand polished. Exact fit for all small block Chevy engines including 302, 307, 327, 350..ect. Sold in a pair only. These SB valve covers are sold in a pair. Order your new set today and SAVE!

*Stock Height

PART NUMBER: ENC-88
1969 - 1972 Chevelle Valve Covers, Big Block, Chrome
1969 - 1972 Chevelle Valve Covers, Big Block, Chrome
Our Price: $99.95

New original style big block valve covers for your Chevelle. Exact fit for all 396 , 402 , 427 , 454 , etc. This new design features the inner oil drippers and beautiful chrome plating.

PART NUMBER: ENC-94-CH
1965 - 1972 Chevelle Valve Covers, Big Block, Chrome with Dent / Slant
1965 - 1972 Chevelle Valve Covers, Big Block, Chrome with Dent / Slant
Our Price: $99.95

New original style big block valve covers for your Chevelle. Exact fit for all Chevy BB 396 , 402 , 427 , 454 , etc. This new design features the inner oil drippers and beautiful chrome plating. On this set the drivers side rear has a angled dent / slant to clear your brake booster.



PART NUMBER: ENC-94E-CH
1969 - 1975 Chevelle Water Pump (Big Block) (Replacement) (Long), Each
1969 - 1975 Chevelle Water Pump (Big Block) (Replacement) (Long), Each
Our Price: $99.95

Water Pump (Big Block) (Replacement) (Long)

PART NUMBER: ENC-4250
1965 - 1968 Chevelle Valve Covers (Big Block) (Chrome) (OE Style) (Without Slanted Drivers Side, With Drippers), Pair
1965 - 1968 Chevelle Valve Covers (Big Block) (Chrome) (OE Style) (Without Slanted Drivers Side, With Drippers), Pair
Our Price: $99.00

Valve Covers (Big Block) (Chrome) (OE Style) (Without Slanted Drivers Side, With Drippers)

PART NUMBER: ENC-4174
1969 - 1970 Air Conditioning Compressor Bracket, Small Block, Front Head, GM Used 3932432
1969 - 1970 Air Conditioning Compressor Bracket, Small Block, Front Head, GM Used 3932432
Our Price: $95.00

1969 - 1970 Air Conditioning Compressor Bracket, Small Block, Front Head, GM Used 3932432

Correct air conditioning bracket for your Chevelle or Nova. This bracket mounts to your cylinder head and connects with the forward adjust bracket. Exact fit for all 69 and 70 small block models. Currently available as an original GM used piece only. The one you will receive will look similar to the one pictured.

PART NUMBER: ENC-272F